|
|
The Lighting of Liturgic Space
Jedličková, Veronika ; Přikryl, Miroslav (referee) ; Zdařil, Zdeněk (advisor)
The bachelor thesis deals with the lighting of aisles, chapel and space under the chior in St. John the Baptist’s church in Frýdek-Místek. The thesis has two parts. The first part focuses on whole concept of lighting, also location of lighting fixtures and its impact on the overall space effect. The second part is the design of the luminaire, respecting the specifics of the space. The luminaire is also trying to satisfy the lighting requirements established by the local parish council.
|
|
|
Visual inspection of axial bearing
Sýkora, Vojtěch ; Richter, Miloslav (referee) ; Janáková, Ilona (advisor)
This thesis is about visual control and measurement of bearings by using image sensors and it is about providing appropriate conditions for this measurement. It describes the selection of suitable hardware to solve this case. A large part of the thesis is the design and creation of my own light. Furthermore, algorithms for processing the acquired images of bearings are proposed. The result of the processing is the determination of the type of bearing in the image and the finding of possible defects.
|
|
|
Light chromaticity sensor
Rejthar, Martin ; Boušek, Jaroslav (referee) ; Šteffan, Pavel (advisor)
Thesis is aimed on problematics and analysis of colorimetry, as an instrument of exploration of light and its characteristics. Research is made to find plausible methods of measurement and comparing light. First part is focused on theory, to discuss basic physical principles connected to lighting and colorimetry. Possible applications of these theoretical knowledge during the realization of the portable meter are studied. Next part speaks on construction and requirements on such a device and processing of results. Device is later assembled, and the basic measurements are performed.
|
|
|
Modern Trends in Vehicle Front Lights Design
Rada, Jakub ; Maršálek, Ondřej (referee) ; Raffai, Peter (advisor)
This bachelor’s thesis deals with the modern trends in the design of the headlamps. The first part presents the sequential stages of development of systems used for headlamps and their design solutions. The second part focuses on the possible cooling alternatives of functional parts in lighting modules, completed with the results of comparative laboratory tests performed by front manufacturers of automotive lighting. The final section contains a comparison of the currently most widely used technologies in the vehicle front lighting.
|
|
|
Energy assessment of buildings
Velísková, Eva ; Maurerová, Lenka (referee) ; Hirš, Jiří (advisor)
The master’s thesis deals with energy assessment of buildings according to a current valid legislature. In the first part the energy assessments problems are solved. The next part solves the energy concept of the educational building, Pavilion P4, AdMaS centre of Faculty of Civil Engineering of BUT, in the form of project documentation. In the part of thesis there is a simulation characterizing dynamic behavior of building. The thesis point is the evaluation of energy balance and a draft of measures leading to the power consumption decrease.
|
|
|
Energy-efficient house for doctors and nurses in the city of Kroměříž.
Dvořák, Petr ; Blasinski, Petr (referee) ; Rubinová, Olga (advisor)
The aim of my thesis is to design the project documentation of an energy-efficient house for doctors and nurses, located near the hospital in Kroměříž. The work is divided into three parts. The first part focuses on the architectural and construction design of the building. The second part deals with the design of the technical equipment of the building and its layout. The third part deals with the design and comparison of different cooling sources. The building is a two-storey building with a flat, vegetated roof and its design is in the building permit stage. On the ground floor there is a bistro, a dining room with food preparation, technical rooms and 3 apartments. On the second floor there are 9 apartments and a lounge. In the middle of the building there is a circulation area with a staircase, a glass elevator and a large skylight that illuminates the whole area. Heating is provided by a gas condensing boiler. Ventilation is provided by three air handling units. A hybrid cooling system with heat recuperation from the refrigerant is designed. For partial electricity demand, 62 photovoltaic panels are installed on the roof of the building. The third part deals with the design of alternative cooling solutions for the building. Multi split, VRV and water cooling system with roof top chiller are proposed in addition to the already designed hybrid system. These four alternatives are compared with each other and the most suitable option is then designed.
|
|
|
Computer-Controlled Planting
Pospíšil, Jan ; Šimek, Václav (referee) ; Růžička, Richard (advisor)
This work is focused on the issue of plant cultivation in domestic conditions. We focused on the automation of the growbox using the Wemos D1 R32 ESP32 board, which then consists of the design and implementation of three parts of the solution, i.e. the growbox itself, including the sensors needed to maintain ideal conditions for the plant being grown, the user applications, for interpreting the values and the configuration of the growbox. Application to collect data from growbox, for later analysis. The solution includes the creation of a demonstration growbox, software for all parts and comparison with available home growing systems.
|
|
|
Deferred Shading
Starý, Petr ; Švub, Miroslav (referee) ; Jošth, Radovan (advisor)
Work deals with design and implementation a tutorial for demonstration deferred shading technique and its possibilities. It explains lighting and shading principles in intuitive and interactive way. Deferred shading is a technique which determines pixel color after the geometry rasterization of the entire scene. In other words the processing of geometry does not interfere with the shading process.
|
|
|
Project Documentation of Electrical Wiring for Comercial Building
Vondráček, David ; Bátora, Branislav (referee) ; Mastný, Petr (advisor)
This bachelor thesis deals with the creation of electrical documentation for a commercial building. It aims to introduce theoretical problems of electrical design in general and the processing of implementation project for a woodworking workshop. The theoretical part of the thesis is mainly devoted to important findings and normative requirements for high-current, low-current distributions, and a draft of external and internal lighting protection. The practical part of the thesis deals with the processing of the implementation project of electrical drawing and text parts for a woodworking workshop. The project documentation includes the preparation of a technical report, the determination of the protocol on external influences, a draft of socket and light circuits, including lighting calculation, complete lighting protection, and risk management, electronic fire system, and a draft of the main and the sub-switchboard of the building.
|
|
|
Luxmeter
Vítek, Jiří ; Bereznanin, Martin (referee) ; Rozman, Jiří (advisor)
This bachelor thesis deals with a method of measuring working illumination and with a design of basic luxmeter, which has a range of measurment 50-1000 lx. The thesis contains a detailed description of individual detectors, a design of luxmeter connection and also includes a description of individual functional blocks. For the whole apparature is performed a suggestion of the printed circuit boards.
|
guest ::
