National Repository of Grey Literature 116 records found  previous11 - 20nextend  jump to record: Search took 0.01 seconds. 
Handling the Rests of Extinguishing Agents with Regard to Environmental Protection and Storage of Waste
Zapletal, Jan ; Mika, Otakar Jiří (referee) ; Valášek, Rudolf (advisor)
The enormous development of industry and commerce, especially the chemical industry, began in the CR after 1993. The chemical industry is one of the world's leading and fastest-growing sector now. It covers a wide range of technologies and therefore provides a variety of products. This has resulted in increased demands on fire fighters, mainly for technological processes during the fire fighting and for extinguishing agents that are used for putting out the fires.
Smoke and Fire Detection in Video Sequences
Tomek, Peter ; Štancl, Vít (referee) ; Švub, Miroslav (advisor)
This thesis aims to analyse a videosignal given in input and find segments that contains fire or smoke. The problem is divided into two cases-detection of fire and detection of smoke. The first and main step of analysation is detection of segments by Gaussian mixture model that is trained by Expectation-Maximization algorithm, or shortly EM algorithm. For smoke detection is than used method of optical flow. The final segments are than processed by some morphological methods and determination of their position is made. Finally, the output of algorithm is again a videosignal in which segments that probably contains fire or smoke are highlighted.
Study of the properties of fillers to the composites requiring high temperature resistance
Vovesný, Václav ; Gross,, Tomáš (referee) ; Bydžovský, Jiří (advisor)
The diploma thesis is focused on the behaviour of natural and synthetic aggregates and their behaviour in polymer – cement composites, while being exposed to high temperature. The processes, happening in aggregates and mortar under the thermal load, were described in the theoretical part of the thesis same as the testing of heat effects on the aggregates and mortar. Further, the influence of high temperature on each component of concrete was described, followed by the suggestion of the appropriate components for concrete exposed to high temperature. Various aggregates were tested in the experimental part of the thesis. The basic physical and mechanical properties of aggregates were examined same as their mineralogical composition with using XRD, DTA and SEM methods. At the mortar, the influence of high temperature on the concrete density, compressive strength and tensile strength was defined. The gained knowledge was evaluated in the final part of the thesis
Rescue of Persons during the Fires of Hight Buildings
Kulhánek, Jan ; Bíla, Jan (referee) ; Valášek, Rudolf (advisor)
Objective of this work is to process the research of fires in high-rise buildings in the Czech Republic in recent 10 years in terms of their effects, number of evacuated people and rescued persons by fire unites. It evaluates causes of injury and death during fires in high-rise buildings and reasons leading to the use of emergency sources by fire unites. It evaluates equipment in high-rise buildings from point of view of function of safety device against fire and equipment installed for intervention in high-rise buildings and it evaluates negative effects which affect the action of fire unites, especially in terms of evacuation and rescue. It analyses various ways to rescue people from point of view of possiblity using fire unites, the availability of life-saving equipment and the speed of rescue. It makes a design for involvement of forces and sources of other components of integrated rescue system to the process of human rescuing.
The study of the behavior of track chassis using dynamic simulation
Kukla, Lukáš ; Kašpárek, Jaroslav (referee) ; Jonák, Martin (advisor)
Objectives of the thesis is to develop research summarizing knowledge about the types of tracked undercarriages for existing mobile machines. Developing critical analysis of the various designs of track undercarriages with regard to their use - forest terrain, unpaved surface. Creating a basic structural design of one of the selected type of belt chassis suitable for use in the field. Verification by the design using dynamic simulation.
Studying the behavior of concrete at high temperatures
Čonka, Ladislav ; Sitek,, Libor (referee) ; Bodnárová, Lenka (advisor)
The thesis is focused on the current issues of concrete resistance to high temperatures. The theoretical part has been processed the changes taking place in the individual components of concrete and changes affecting the physical - mechanical properties of concrete and color-changing effects manifesting high. In the experimental part of the load was, carried concrete test samples to a temperature of 400 ° C, 600 ° C and 800 ° C. After the thermal load, has been on test samples tested changes in physico - mechanical properties, especially concrete compressive strength, water absorption but also a visual assessment of the concrete surface
Evaluation of the investigation of fire causes in big accidents
Kavka, Martin ; Vojtěchovský, Filip (referee) ; Valášek, Rudolf (advisor)
The objective of this work is analysis of current status in the sector of detection of the causes of fire in the Czech Republic, including embedding of this activity in legislation, make an overview of major fires in the Czech Republic in recent 10 years and make a statistic of fires, which caused damages exceeding CZK 5 million. Evaluate these events in terms of causes of fire. Next objective of the work is analysis of the hazard and expected specialities on the investigation spot of fire causes and evaluate the differences in procedure of investigating causes of fires in terms of major events. It solves the activities and cooperation of investigator of causes of fires with commander of intervention and unit with respect to maintaining of stops for consequent documentation and investigation. Make a design for equipment for investigator of causes of fires and make a design for protection against hazard which is on the place of intervention.
Valuation of total damage to a house caused by fire
Hornychová, Michaela ; Nykodýmová, Veronika (referee) ; Šmahel, Milan (advisor)
The aim of the Thesis is to determine the amount of indemnity for the total damage caused of the wooden detached house caused by fire, find out the costs of bringing the property to its original state and evaluate the price of the original and after an insured event the newly established building. The theoretical part is devoted to the basic concepts and methods in the field of real estate valuation and insurance and the liquidation of insurance events. On the introduction and theoretical part is followed by a practical part in which I apply the theoretical information on the real, by fire stricken the wooden family house, I approach the location and describe the building technical condition before and after the occurrence of the insured event. I find a new price of the real estate at the time of approval, the current price before and after the occurrence of the insured event and the new price of an identical family house without the structures which have been preserved and have not been damaged by the fire or fire-fighters. At the conclusion of the Thesis is the insured value of the building after repair of damage compared with the insured value just before the occurrence of the insured event.
ANALYSIS OF FIRE RESCUE TECHNIQUE AND FIRE BRIGADE UNITS AT EMERGENCIES
Kinduch, Oldřich ; Kratochvíl,, Václav (referee) ; Valášek, Rudolf (advisor)
In those publication is described development of fire, the mobile fire-fighting technics evolution, engineer ś knowledge in fire tactics, fire protection equipment, work safety at the fire brigade station and also by fire fighting action. Engineer´s knowledge and above all the oportunity to improve his expert (profesional) knowledge.
Structural Analysis of Steel Members in Fire
Runštuková, Monika ; Kytýr, Jiří (referee) ; Gratza, Roman (advisor)
This thesis deals with solution of steel members under fire conditions. The goal of the thesis is to examine and compare unprotected steel members with steel members protected by different types of passive protection. Calculation is performed according to applicable design standards. ANSYS software is used for thermal and structural analysis.

National Repository of Grey Literature : 116 records found   previous11 - 20nextend  jump to record:
Interested in being notified about new results for this query?
Subscribe to the RSS feed.