|
|
Bridge ower the Opavice river
Tang, Minh Phú ; Russnák, Adam (referee) ; Panáček, Josef (advisor)
The diploma thesis deals with the design of a road bridge on the I/57 expressway over the relocation of the cycle path, the Opavice river and the local road, which involves the relocation of the access to the waterworks. The bridge structure is located in the territory of the town of Krnov. A study of the area's bridges is part of the project and three studies have been prepared. Study A was chosen for detailed processing. It is a continuous box girder bridge with three spans. The superstructure is designed as a monolithic, post-tensioned structure. A sliding girder is being investigated for the structure's construction. Scia Engineer 18.1 is used to do the load effects computation. Only the consequences of vertical load effects have been addressed, with no consideration of horizontal load effects. The structure was evaluated using limit states, taking into account the impact of construction on its design.
|
|
|
Overpass bridge across the expressway
Beran, Jakub ; Zlatuška, Karel (referee) ; Nečas, Radim (advisor)
The topic of this thesis is detailed design of the supporting structure of a bridge. The final design is chosen out of three variants. It is a single beam structure consisting of 6 spans. The supporting structure is prestressed concrete with post-tensioning technology, the impact of phased construction is considered. the subject of the expertise of the structure is ultimate limit state, as well as service limit state, designed according to the code. The thesis also contains drawings, visualization and Engineering Report of the structure.
|
|
| |
|
| |
|
|
Bridge on the I/39 road
Pokorná, Šárka ; Svoboda, Adam (referee) ; Panáček, Josef (advisor)
The topic of this Bachelor thesis is design of thle bridge on the I/39 road. Three variants of studies were created. Study C has been choses as the best variant – prefabricated pre-tensioned beams with composite deck. Bridge with one span. Time dependent analysis was taken into account.
|
|
| |
|
|
Prestressed bridge on the expressway
Juřenčáková, Jana ; Zlatuška, Karel (referee) ; Koláček, Jan (advisor)
The purpose of the diploma thesis is to design a expressway bridge over the river Vsetínská Bečva. The bridge is located between Valašské Meziříčí and Vsetín. Separate superstructures are designed for each directions of the expressway. The right superstructure, which is wider, is considered for detailed design. Two variants were proposed, A double T beam superstructure and a box girder superstructure. The three span box girder superstructure was chosen for the design. Spans are 48+65+48 m long. Two options of construction process of the superstructure were proposed. This bridge is designed according to the limit states, the influence of construction process is considered. Structural models of construction were made as a finite element model and a plate model. Structural analysis, drawings and visualization were developed.
|
|
|
Nonlinear Analysis of Composite Cross-Section With Respect To Effects of Shrinkage, Creep, Ageing and Temperature
Hron, Lukáš ; Kulhavý,, Tomáš (referee) ; Čajka,, Radim (referee) ; Vráblík,, Lukáš (referee) ; Navrátil, Jaroslav (advisor)
Advanced computational methods for the analysis of building structures are used more often in engineering practice. Their use is enforced not only by the demands for aesthetics, functionality and high economy of the construction, but often directly by code provisions and requirements. Therefore, it is necessary to provide for an engineer the robust, but transparent tool, which can be used for an efficient design of structure all over it's design working life. This work deals with the creation of a computational system for time dependent analysis of concrete and composite structures. It is assumed a solid or composite concrete section with possible application of pre-tensioned and/or post-tensioned tendons. Each phase of step-by-step build composite cross-section has a general geometry. The used algorithms give us the possibility of a detailed analysis of the structure in individual construction stages, provide the designer better view on the behavior of structures with respect to concrete aging, shrinkage and creep, relaxation of prestressed tendons and provide an information on the redistribution of internal forces in the structure and in different phases of the cross-section. Stress state of the structure calculated in this way come in useful further in the design and checking of ultimate and serviceability limit states. Results of time dependent analysis are verified by manual calculations and by comparing with the results obtained by simplified methods.
|
|
|
Bridge formed by cell box girder
Zifčák, Karel ; Brtáň, Stanislav (referee) ; Nečas, Radim (advisor)
The subject of this thesis is the design and assessment of the bridge construction across the deep valley on highway traffic. From three variants, which were compared to each other, was the most suitable further examined. The solved structure is made of post-tensioned concrete, and is formed with cell box girder with transverse overhangs, which are supported by prefabricated struts over the length of the bridge. The load was considered by the European Standard EN 1991-2 - Traffic loads on bridges and dimensioning according to EN 1992-2-Design of concrete structures - Concrete bridges - Design and detailing rules.
|
|
|
Bridge on I/38 road.
Novotný, Tomáš ; Pachl, Radek (referee) ; Panáček, Josef (advisor)
The final thesis is focused on design of valley bridging on I/38 road at the Havlickuv Brod bypass. The thesis contains study of the bridging area. For detailed assessment was chosen, from three variants, a two-beam cross-section girder of 4 spans. Load-bearing structure is designed as cast-in-place, post-tensioned, concreted at fixed falsework without phased construction. The serviceability limit state and the ultimate limit state were assessed. The thesis contains, apart from structural design, drawings and visualizations of the bridge.
|
guest ::
