National Repository of Grey Literature 121 records found  beginprevious102 - 111next  jump to record: Search took 0.00 seconds. 
Residential building in Valašské Meziříčí
Pasztorek, Martin ; Woytela, Jindřich (referee) ; Benešová, Romana (advisor)
This Bachelor thesis deals with a design of new building – apartment house. Designed apartment house is located in Zlin region, in the town Valasske Mezirici. Altogether, the designed bulding contains partial basement, eight dwelling units and four storeys. In the ground floor we can find a storage cellar, utility room and cleaning room. The ground floor is made of 3 single sections – office section, section with access to dwelling units with the pram room and section with driving school. These sections are separated from each other and each section has its own entrance. Dwelling units are located on the second floor, third floor and fourth floor. The second floor is made of small flats – there are 3 studios and 1 one-room flat. Larger flats are located on the third and fourth floor where we can find 2 two-bedroom flats and 2 three-bedroom flats. Every dwelling unit has a disposal of the loggie except the flats on the fourth floor – these have a disposal of the terrace located on a flat green roof. Apartment house is built from clay block and overhang part is made of precast frame elements. Building foundations consist of foundation strips. The columns that are erecting the overhang part are placed on foundation pads. The basement wall is built from concrete blocks. Ceiling construction is made of prestressed ceiling panels Spiroll. Staircase is reinforced concrete precast. Roofing is solved by flat green roof. Thermal insulation of the building is solved by external contact insulation system that is internationally labeled and known as ETICS. As a thermal isolator serves the expanded polystyrene.
Detached house with a cafe in Havlíčkův Brod
Havlová, Jana ; Novotný, Miloslav (referee) ; Petříček, Tomáš (advisor)
The subject of this these the proces of building technical od desingn documentation for the realization of a newly-built detached house with a cafe in Havlíčkův Brod. The building is slightly sloping terrain and is with partial basement. Living area have got two above- ground floor and basement. Whole part is roofing gable roof with roof slope 30° with concrete tiles. In the second part is single-storey building a cafe is roofing flat green roof with slope 3°.The garage is separate with flat green roof. Vertical loadbearing structures above ground are made of Porotherm system, external walls of the basement are made of prefabricated concrete shuttering blocks. Horizontal structures are designed as a monolithic reinforced concrete slab. Part of the external wall finish are made of silicone plaster and part of it consists of ventilated facade with wood cladding.
Detached house with café
Večeřová, Gabriela ; Rebrova, Tatiana (referee) ; Kacálek, Petr (advisor)
The bachelor thesis deals with the design and processing of the project documentation of a family house with a café. The designed building is located in the quiet uptown of Trutnov. It is two-storey partially basement building with a flat green roof and a penthouse roof. Foundations of the building are concrete and reinforced concrete. Supporting, peripheral and screen walls are designed from the POROTHERM system. Where the outer housing consists of a ceramic construction and of the ETICS insulation system. Ceiling construction is designed from the POT ceramic-concete beams and from MIAKO ceramic inserts. Part of the facade is created from plaster; another part of the facade consists of a ventilated facade made of wooden prisms and Nordic pine tiles. The dominant feature is a glazed facade connecting both floors. These individual architectural elements divide the building into individual units and fit into the natural landscape. The building creates two parts, namely residential part of the house and café. In the 1st floor there is a café, a guest room with a bathroom, a garage, an entrance hall, two children's rooms with a bathroom and a hall with open space from the basement. In the 2nd floor there is a technical room, bedroom, bathroom, separate toilet, kitchen with dining room and open space to 1st floor. The floors are connected by a staircase in the open space.
Apartment building
Světlík, Adam ; Kučera, Radim (referee) ; Struhala, Karel (advisor)
The subject of bachelor thesis is the composition of project documentation of an apartment building at edge of city Bučovice. Apartment building is four-storey building without a basement and is detached building on almost flat terrain, consisting of several parcels, on the cadastral unit of Bučovice. The object is connected to the local road on the north side of the property. Between the object and the communication is parking for the user object, which has 17 parking spaces. The ground floor is divided into the dwelling unit and the technical facilities. Other storeys are divided into the two dwelling units and these units have balconies. The walls are composed of aerated concrete blocks YTONG, in combination with an acoustic internal sand-lime blocks and are based on concrete foundation strips. The celling is reinforced light-weight clay concrete LIASTROP. The floors are heavy floating. The roof is green warm flat roof. The whole object is insulated with contact thermal instulation from mineral isolation MULTIPOR and expanded polystyrene. The drawing part was drawn in AutoCAD.
Apartment building
Horká, Simona ; Kervitcer, Marek (referee) ; Čuprová, Danuše (advisor)
Subject of this bachelor thesis is detail design documentation of an apartment house. Proposed apartment house with garages is located in the suburbs of Hovězí municipality in the Zlín region. Cadastral municipality Hovězí, plot No. 1355/50. The object has 7 housing units, utility rooms, chambers in each apartment and pram room in the upper floors. In the basement there is mechanical room, drying room and cellar cubicles. Basement is connected with upper floors by tractive elevator and a staircase. The garages, designed as row object, pertain to the apartment house. The triple-storey apartment house is designed partially with a cellar and with a sloping roof. The pertaining garages are single-storey with flat roof. The constructional system is longitudinal wall. The foundation is made of concrete strip footing. The circumferential supporting masonry is built from concrete blocks of permanent shuttering in the basement and from ceramic blocks in the upper floor. The vertical supporting system in the interior is also made of ceramic blocks. The ceiling construction is made of folded ceramic concrete. Staircase is monolitic reinforced concrete. The roof of the object is made from wooden bar joists creating the shape of a comb roof and the garages are roofed by flat green roof. Thermal insulation is designed as mineral wool. Garages have stone facing without insulation.
Home for the elderly Ořechov
Koláčková, Michaela ; Pobořil, Lukáš (referee) ; Petříček, Tomáš (advisor)
The subject of the diploma thesis is processing of the technical part of the project documentation for the new three-storey home for elderly with partial basement, which is located in the village Ořechov. The object is situated on a flat terrain, which is situated little bit higher than local road. That was used for an architectonic conception of the house –basement is open and accessible by local road from the north side, the rest is under ground. The detached building is partly roofed by a flat green roof and partly roofed by flat roof covered with gravel. The object is divided into individual areas. In the second and third floor is living and social area. 11 dwelling units of different sizes are designed. First floor is also accessible to the public and together with entrance hall and reception, which is situated in the middle of the object with the main entrance on the east side, there are another two separate areas. The left wing serves as a medical department, in the right wing is cofé with his own staff facilities. In the basement is a utility room and storage areas.
Fitness and Wellness center
Pospíchal, Pavel ; Kalánek, Jiří (referee) ; Brzoň, Roman (advisor)
The diploma thesis is about design and project documentation of fitness and wellness center. The designed object is situated in the outskirts of Havlíčkův Brod in a quiet environment and with direct connection to the city dam. The object is a three-storey partially-basement building with a flat green roof in three levels. The building is based on the base passages of plain concrete, reinforced concrete slabs and beads. The supporting, peripheral and partition walls are designed from the VELOX system. The outer casing consists of cement slab, reinforced concrete core and thermal insulation. In open-plan areas there are designed reinforced concrete columns. The ceiling structure is predominantly designed from reinforced concrete slabs to lost formwork. Part of the facade is plastered, the other part is ventilated. Individual architectural elements divide the object into units and fit into the natural landscape. The object is divided into several tracts where each has its own purpose and specification. In the 1st floor there is a gym, room for trainers and coordinating training room. In the center there is atrium, reception, cloakroom, buffet and public toilets. Vertical communication is possible using a suspended staircase or a hydraulic lift. On the 1st underground floor there is a reception desk and cloakroom for disabled people. In the western part of the tract there is an indoor pool with whirlpool, of course there are cloakrooms divided for men and women. The eastern part of the tract is used as a technical room of air-conditioning, there are also 3 saunas, including a relaxation room and dressing room. All facilities on the 1st underground floor have access to an outdoor park, including a dam and outdoor whirlpools. In the 2nd floor there is a staffing facility, an area for manegement, technical rooms and an outdoor green terrace. The designed object is designed for disabled people. Around the object there is designed a car park for 33 cars.
Kindergarten
de Ceita, Janet Klaudie ; Sibilla, Luboš (referee) ; Struhala, Karel (advisor)
The diploma thesis deals with elaboration of design documentation for the new building of the kindergarten. The building is divided into two parts. In the first part, two separate classes are designed, each with a capacity of 24 children, there are also teacher’s facilities, a logopedic counseling, and office. In the second part of the building there are classrooms for external activities. In the first part of the building, the kitchen is designed for the needs of the kindergarten. The building has two aboveground floors and a basement. Load-bearing walls are designed from SENDWIX, lime-cement bricks. Thermal insulation on walls above ground floor are a mineral wool and underground floor walls, as well as the plinth are insulated by extruded polystyrene XPS. The floors are made of pre-stressed concrete floor panels SPIROLL. The building has two types of roof: flat green roof and flat roof with stone aggregates. The drawing documentation necessary for the realization of the kindergarten is processed including five structural details. The drawing part was processed in the AutoCAD computer program. Part of the work is fire, acoustic, thermal-technical solution and daylighting.
High standard detached house on a slope
Pavelka, Šimon Václav ; Šoulová, Eva (referee) ; Utíkalová, Ivana (advisor)
The aim of this bachelor thesis is to elaborate project documentation of construction of a high standard detached house on a slope. The building is self-standing and is set on a sloping terrain in the cadastral territory of the city of Brno, in the district Žabovřesky. The ground plan of the house is designed in the shape of letter L. One storey is partly in basement, one storey is planted in the terrain and one is above ground. Garage for four cars is part of the building connected to the house by a fire door in the vestibule. The roof is designed flat and vegetative. The entrance to the building is situated from the northern side. Here is also the entrance to the ground which is from the adjacent local road. The construction system is made of reinforced concrete skeleton consisting of columns and beams. The KMB Sendwix panel has a contact isolation system. Horizontal constructions are designed from pre-stressed Spiroll ceiling panels and KMB Sendwix system components. The internal and external stairwells are reinforced concrete, prefabricate. Through the leeward to the basement on the ground floor of the building, we enter the residential part of the family house, but also into the garage and dressing room. From the hall we get to the study, the room with toilet and bathroom. The bedroom are includes with a dressing room, a bathroom and a toilet. Furthermore, there are two symmetrical rooms, each of which has its own dressing room, loggia, bathroom and a toilet. All bathrooms and the hall on this floor are fitted out with roof skylights. The hall, connected by a staircase to the first basement, connects to the corridor that is connecting the living rooms with a technical and also a relaxing part of the house. From the kitchen and the dining room we reach the wine cellar, cellar and living room. The dining room and the living room are connected by a double-sided fireplace, and both rooms have access to the garden. There is also a cinema and a toilet located below t
Wine Pension Aurelius
Čejka, Kamil ; Juračková, Edita (referee) ; Králová, Zuzana (advisor)
The subject of this thesis is to create a project documentation of the design of the new development, a boarding house with a restaurant and wellness centre. The object is designed as a detached building with two floor and wine cellar. The first floor above ground contains a restaurant and wellness centre. On the second floor there are 14 rooms for rent. The object foundation base are foundation strips. The load-bearing structure is a clay masonry and prestressed concrete floor slabs Spiroll. The object is roofed with a flat green roof. The drawing is processed with help of AutoCAD software.

National Repository of Grey Literature : 121 records found   beginprevious102 - 111next  jump to record:
Interested in being notified about new results for this query?
Subscribe to the RSS feed.