|
|
High-current solid state relay
Daďa, Pavel ; Ctibor, Jiří (referee) ; Červinka, Dalibor (advisor)
The bachelor's thesis deals with the design of an electronic semiconductor contactor for power switching of battery systems. The work includes familiarization with the function and use of photovoltaic systems and familiarization with types of battery systems. Furthermore, the original solution using the GIGAVAC GX23 power contactor and introduction along with the design and dimensioning of the newly proposed solution using a power semiconductor contactor. The conclusion of the work summarises the findings of the design and possible extension of the final product. The text of the thesis is divided into six chapters. The first chapter contains a description of the issue of connecting battery modules in the FVE area. The second chapter deals with the issue of connecting battery blocks. The third chapter contains a general description of the SSR for alternating voltage switching. The following fourth chapter describes SSR relays for dc voltage switching. The fifth chapter describes the specific solution of the power switch including the dimensioning of the power elements and the design of the radiator. In the next chapter, the knowledge and possibility of further development of the SSR contactor.
|
|
|
Automation of the calibration process
Mařas, Michael ; Šedivá, Soňa (referee) ; Beneš, Petr (advisor)
This master thesis deals with the automation of the calibration process at the workplace for calibration of electronic power meters and the description of the method of evaluation of calibration results. The paper analyses the calibration workstation and the manual method of calibration performed by the calibration laboratory staff. Furthermore, proposals for automating the manual method of calibration and a description of the implementation of a program for automating this process are given. Subsequently, the uncertainty analysis is described in the paper. In this section, the uncertainty analysis according to the GUM method and the subsequent calculation of these uncertainties are presented. The correctness of the calculation of uncertainties according to the GUM method is verified by the Monte Carlo method. In the last part of the work, the method of evaluation of the calibration results according to ILAC-G8:09/2019 is described and the form of the calibration protocol is described.
|
|
|
Bus wiring systems for complex building management
Mokrý, Lukáš ; Macháček, Jan (referee) ; Bátora, Branislav (advisor)
The aim of my thesis is to examine current opportunities of bus wiring systems for complex building management, mainly its power and economic evaluation. It can be simply called intelligent electrical installation. I will examine two systems from INELS and ABB company. These systems contain functional components, mainly modules and controllers. By means of other materials, I’ll create a panel. Components will be placed there and electrically connected. After this, systems will be put into operation and programmed by means of their software. The next step is measuring of quatities during the various conditions of systems and consumption, which is one of the main aims of the thesis. Two apparatuses will be used for measuring. This thesis itself will contain theoretical analysis of systems, their description, using the way of operation and main advantages and disadvantages. Single components and complete process of measuring and working in laboratory will be described. An overall evaluation and comparison of the systems from various points of view, including the price, will be put together from results.
|
|
|
Realization of a smart meter
Cu, Lukáš ; Mlýnek, Petr (referee) ; Lieskovan, Tomáš (advisor)
This thesis deals with the issue of smart metering, specifically electricity metering. It introduces the reader to the basic concepts associated with it and describes the technology used to implement such an electricity meter. The practical output of this work is a real smart electricity meter made of a singleboard platform Raspberry Pi 3 B, the Arduino platform and two external modules for measuring the state of electrical network. These modules are current sensor SCT-013-000 and a voltage sensor ZMPT101B. The software solution for controlling individual components and for working with the data is implemented using a combination of code created specifically for this purpose and of code from an external library belonging to Gurux company.
|
|
|
Calculation of electrodynamic forces in 250 A circuit breaker
Görig, Michal ; Dohnal, Petr (referee) ; Valenta, Jiří (advisor)
This master’s thesis deals with the calculation of electrodynamic forces breaker BD250NE305. Main tasks in this semester project is to study the theoretical analysis of individual parts specified breakers. Processing theoretical analysis of these forces. Creating a 3D model current path and sheets quenching chamber single phase circuit breaker in Autodesk Inventor Professional 2012. Another challenge is the subsequent export the model into the simulation program ANSYS Maxwell. After simulation, the specified conditions must be processed and the results of the present work is to evaluate.
|
|
|
Line protection against overload and short circuit
Konšel, Ladislav ; Vaněk, Jaromír (referee) ; Valenta, Jiří (advisor)
This work includes a theoretical treatise on the operation of electrical wiring for the overload and short circuit. This is mainly on thermal effects of over current and their influence on the properties of conductors and insulation. Work Includes links to determine the load current, depending on the properties of leadership and its surroundings. It also deals with the protection of conductors against overload and short circuit. The work includes measurements process of warming wires. Practical project of proposal circuit is created using SICHR. The project includes proposals of conductor’s sizes and safety components for both residential building and individual flats.
|
|
|
Stabilized operation of the 400 kV power line
Jurča, Ondřej ; Bok, Jaromír (referee) ; Blažek, Vladimír (advisor)
This thesis deals with methods of solving lines under voltage levels of a very high transmission voltage and extra high voltage. The first, theoretical part of this paper analyses different methods how such lines are solved. In particular, an accurate solution is provided simulated by means of a line with evenly distributed parameters, and an approximate solution simulated by means of a line with lumped parameters. Furthermore, special cases of steady running conditions of the line are reviewed, such as no-load running, short-circuit run and line operation with natural load. In conclusion of the theoretical part is given a general method of solving an extra-high-tension and extra high voltage network; also, some graphical methods of solving such networks are shown including their brief description. The second, practical part of the present paper involves application of the above mentioned methods of solution on a specific line with given parameters, solving conditions at the beginning of the line under steady running conditions and in special cases of the line operation. The conclusion of the thesis summarises the obtained results and provides final assessment of the individual methods of solution in terms of calculation accuracy.
|
|
|
Substituting circuit of an induction machine
Běloušek, Radim ; Cipín, Radoslav (referee) ; Patočka, Miroslav (advisor)
Although induction motors are the simplest and most working reliability machines, is the identification of the parameters of their substituting circuit very difficult. There is solved the identification of the parameters of the substituting circuit in the T-network and ? –network in this work. The work also includes the proposal of magnetic circuit of the induction motor, the calculation of magnetizing and leakage inductances and resistances of the machine. The conclusion of the work is devoted to the sensitivity analysis of current and torque characteristics of induction motor upon the change of the single parameters of the substituting circuit.
|
|
|
Optimalization of Induction Furnace Operation in foundry Vsetín
Trachta, Jiří ; Nowak, Stanislav (referee) ; Lázničková, Ilona (advisor)
The aim of this work is optimalisation of induction furnace in foundry for company PROMET FOUNDRY a.s. The company has two induction furnances. There are installed as identical construction. They have 2 modes of operation. First mode is founding and second mode is mode, where is temperature in maintain mode. Only one induction furnance can work in the founding mode at a time though. Inducion furnances are in the single-phase connection and they cause unbalance in the distribution network. Near the foundry there is a small network area whitch it is operated by company Zásobování teplem Vsetín a.s. The consumption of electrical energy in foundry so big, that in the year 2009 was made elaborate for Zásobování teplem Vsetín a.s. It was write at Laboratoře diagnostiky výkonů (Laboratory of performance diagnostics), which is a part of Electrotechnic Department at Technical Univarsity of Ostrava. The ordered study was named “Verification of causes of increased reactive energy consumption during transition from electricity delivery to electricity consumption”. The conclusion of this assignment confirms that in distribution network in the Jiráskova area in Vsetín there is unbalance of electrical energy and there is high part of reactive power. The next conclusion is crucial to find the customer who made the unbalance and to set relevant remedy. The last step will be the identification whether such device can actually be effectively balanced. It was subsequently proved that the Promet Foundry was causing the unbalance and that balanced consumption would be reasonable. Promet Foundry thus addressed Autel a.s. company with an inquiry to make a study of removing the causes of the unbalance which is caused by current induction furnaces operation at a minimum possible cost, least possible influence on the performance and minimum construction changes concerning the building. In this thesis there will be some topics. The result of which will be introducing of used heating technology, introducing of company and of effective plant performance and subsequent suggestions of possible unbalance removal or reactive power decrease. Several ways which are being implemented in the industry in order to balance consumption will be described. A suitable balancing plant will be subsequently chosen and its parameters will be calculated.
|
|
|
New solutions of converters for measurement of current-mode filters
Štork, Petr ; Kubánek, David (referee) ; Jeřábek, Jan (advisor)
This bachelor’s thesis describes some new solutions of differential converters that convert voltage to current and vice versa. Such converters are necessary for measurement of frequency filters in a current mode due to absence of instruments able to mesure signals with current as signal carrier. The goal is to design such converters that should influence gauged frequency properties in a current mode as little as possible. Converters will consist of operative amplifiers with current feedback. Converters designed this way are tested using simulations from PSpice programme, where particularly wideness of band of individual solutions is tested. Simulated solutions that are the most suitable ones are practicably re-enacted and gauged. These resuls of measurement and simulations are compared.
|
guest ::
