|
|
Design of a concrete bridge to the ČEZ substation
Pohůnek, Erik ; Nečas, Radim (referee) ; Zich, Miloš (advisor)
The subject of this bachelor's thesis is the design of a reinforced concrete bridge based on the submitted documents. The goal is the design and evaluation of two variants, from which the most suitable variant is selected and processed in detail. The selected supporting structure is designed as a reinforced concrete monolithic frame. The internal forces from the applied load are calculated using the Scia Engineer 20.0 program. The load-bearing structure is assessed for the limit state of load-bearing capacity and the limit state of usability. Dimensioning and assessment of individual parts of the supporting structure is carried out according to valid Eurocodes.
|
|
|
Structural design of the industrial building for increased loads
Landa, Tomáš ; Olšák, Martin (referee) ; Klusáček, Ladislav (advisor)
The bachelor thesis deals with the design of a ceiling structure for a load of 15 kN/m2. The design was prepared on the basis of the submitted documents. A preliminary design of the structure and its elements was developed for the given problem. The structural analysis was performed in SCIA Engeneer software system (including manual control by simplified method). The result of this bachelor thesis is a static calculation and design documentation of the designed structures.
|
|
|
Single span railway bridge
Janíčková, Lucie ; Koláček, Jan (referee) ; Nečas, Radim (advisor)
The topic of this thesis is a design of an one-span bridge over a river. The construction of prestressed beam bridge with one field with lower bridge deck is preferred out of all developed options. The construction is designed and assessed to the ultimate limit state and the serviceability limit state according to actual EN standards.
|
|
| |
|
|
Pedestrian bridge at Staré Hory
Měrtlová, Kamila ; Svoboda, Adam (referee) ; Koláček, Jan (advisor)
The subject of the bachelor´s thesis is the design of a footbridge in Staré Hory. Two footbridge designs were prepared, which were evaluated and then one of them was selected and processed in detail. The selected proposal was entered into the Midas Civil program and assessed in detail for the ultimate limit state and serviceability limit state. The calculation was performed in the program Midas Civil, supplemented by manual calculations in MS Exel. The calculation procedure was carried out according to valid standards and regulations.
|
|
|
Slab bridge
Malý, Jan ; Muroň, Vlastimil (referee) ; Panáček, Josef (advisor)
Bachelor's thesis deals with the design of a road bridge over the Volyňka river. Three bridging variants were proposed, of which the bridge variant, whose supporting structure consists of an additional pre-stressed concrete slab, was chosen for subsequent detailed assessment. The variation with prestressed prefabricated girders with composite slab is chosen for more detailed assessment. Detailed structural design is made and selected parts of the construction are checked for ultimate and serviceability limit state by Eurocode. Calculation of load is made by manual way and then by exact way with program Scia Engineer 22. The results from both calculation methods are then compared. Detailed drawings and visualization are made as well.
|
|
|
Motorway Viaduct
Polách, Marek ; Šopík,, Leonard (referee) ; Stráský, Jiří (advisor)
The thesis is a design of a bridge crossing the valley of the Hrabyňka creek as a part of road I/II. Firstly, three possible structures are designed and according to their advantages and disadvantages, the best of them is selected. In this case a cable stay bridge was selected. Following is a design of span lenghths, collumn heights and the cross-section. Then the loads are detremined and applied on a numeric model cretaed in software working on the basis of FEM. In continuation internal forces are calculated and their propriate combinations for service limit stay and ultimate limit state with time dependent analysis taken into account. In the end the reinforcement steel is designed for one part of the structure. Detailed drawings are also part of the thesis.
|
|
|
Cast-in-place tank of sewage plant
Čožík, Martin ; Šiška, Radek (referee) ; Strnad, Jiří (advisor)
The thesis deals with the design and assessment of monolithic reinforced concrete structures tanks and wastewater treatment plants in accordance with applicable standards and drafting drawings. The tank is divided into individual solved parts: base plate, walls and ceiling plate. These parts are designed according to the ultimate limit states and serviceability. Resolves an assessment of the foundation structure according to the second geotechnical categories.
|
|
|
Concrete ribbed slab
Dvořák, Vít ; Perla, Jan (referee) ; Strnad, Jiří (advisor)
The bachelor thesis deals with a design of monolithic reinforced concrete, line supported and cross reinforced slab and a design of supporting reinforced concrete ribs. The plan of the slabs is rectangular and one time bent. The content bachelor thesis is calculation and design of reinforcement of slab and ribs. For the calculation was used software Scia Engineer 14 and was checked by manually calculation. The slab is located in the first floor of polyfunctional house. Other parts of the object are not covered by the thesis.
|
|
|
Pedestrian bridge across the river Svitava
Bezručová, Kristína ; Koláček, Jan (referee) ; Nečas, Radim (advisor)
The aim of this thesis is the design and analysis of pedestrian bridge across the river Svitava. Three variants were designed. The variant of one-span frame construction with a parabolic haunch was chosen for analysis. The calculation of load effects was made in software Scie Engineer. For evaluation was used MS Excel. The design and assessment are according to the europien standards. The time dependent analysis is not treated in this work.
|
guest ::
