|
|
Strain, stress and strength analysis of the frame construction.
Kysilko, Vít ; Damborský, Petr (referee) ; Vrbka, Jan (advisor)
The bachelor´s thesis is intent on the computation of a plane frame which is used for test the resistance of composite tubes to a changing pressure. As a computational model I used simplified frame loaded by solitary forces which work eccentrically from the axis of symmetry of the frame. Because I cannot exactly use the theory of simple elasticity and strength in this task I make two calculations with various shapes of midline. This is twice internally statically indeterminate task, appropriate deformation conditions were solved by Castigliano’s theorem. Bending stress is dominant but in calculation is also composed energy of normal and displacement forces. Inspection of cyclic fatigue was made in possible hazardous places. Analytic calculation was carried out in MAPLE 12 and it was compared with Finite Element Method analysis with Ansys Workbech 12 software.
|
|
|
Strain, stress and strength analysis of the truss construction.
Hladký, Maroš ; Horníková, Jana (referee) ; Vrbka, Jan (advisor)
The thesis is focused on strain, strength, and strain analysis of planar truss construction. The purpose of this work is to determine the load on each rod, and to assess the safety against limit states. After determining the primary characteristics, the structure will be modified and load and safety re-calculated. Depending on the outcome, the design will be changed again. Next, will be destined gravity affect on the design and impact of production inaccuracy. Deformation of structure will be calculated.
|
|
|
Stress and strength analysis of the bike frame and compliance assessment at selected construction places.
Prášil, Jiří ; Horníková, Jana (referee) ; Vrbka, Jan (advisor)
Purpose of this work was the realization of stress and strenght analysis of the bike frame with the help of the basic elasticity approach. At first I had to transfer this task from three-dimensional to two-dimensional and also to simplify to fulfill the beam conditions. I also focused on static safety of the construction. This static safety was solved for two loading modes. First one was define as the load, which cyclist can induce, when he is going on the direct road. Second one was defined as the load, which he can induce, when he is going up to the hill. I used for these calculations mathematical software such as Mathcad 14 or Maple 12, but also modeling software especially Autocad for establishing correct dimensions. At the end I checked the stress and strain analysis obtained by the basic elasticity approach with the solution performed making use of the ANSYS software code.
|
|
|
Stress, strength and strain analysis of the crane truss construction.
Nedělka, Pavel ; Borák, Libor (referee) ; Vrbka, Jan (advisor)
This bachelor thesis deals with stress, strength and strain analysis of the plane crane truss construction. The aim of this work is the calculation of forces for the simple frame with the help of joint equilibrium equations. These forces will be modified by further construction treatment. This treatment turns the simply frame into the hyperstatic system. The obtained values data are the input data for the design of geometry of particular bars. The unknown dimensions will be determined by two strenght limit states. These limits are: limit state of elasticity and limit state of stability. Then we will make the strain analysis. It will determine the displacement in the action of the force, the effect of actual clearance as well as the brace failury effect to the construction safety. Further will be determined the influence of the weight of the construction to the strenght.
|
|
|
Stiffness estimation at the machining head and the strength analysis of the moving parts of the machining center MCV 1220.
Zbožínek, Martin ; Houfek, Martin (referee) ; Vrbka, Jan (advisor)
Main objective of the work was to estimate the possibilities and the limits of elementary stress and strain analysis of the construction. At the beginning it was necessary to simplify the problem to the 1-D bar problem. The calculation was performed for three typical loading cases, namely for the middle and the border position of the machining head. The contact forces and momentums and the displacements at the machining head have been calculated. The obtained results were then used for the stiffness evaluation of the construction at the machining head. The strength analysis of the moving parts of the machinig center has been done, too. Modern software products (Autodesk Inventor, ProENGINEER, ANSYS Workbench, Maple, Mathcad, etc.) were used for the calculation. The results were compared with The Finite Element Method results.
|
|
|
Strength design of the press frame construction and the compliance calculation at the load position.
Dobeš, Martin ; Suchánek, Miroslav (referee) ; Vrbka, Jan (advisor)
The bachelor's thesis is intent on the calculation of a plane frame which is used for hydraulic press. The theoretical basis for the calculation is mentioned in the first part of this thesis. The calculation of a concrete exercise according to the task set in the bachelor's thesis is in the second part. As a frame model we used a plane frame with two crossbeams. The load on the plane frame is interpreted by solitary forces which work upon the crossbeams. The calculation uses the Castiglian's theorem to specify the unknown parameters from deformation conditions. The calculation considers flexion energy of tensity. In the next part of the calculation, we consider the energy of tensity caused by vertical and normal shear for comparison. Coordinates of the load position can be changed at will. The final results of the thesis are a concrete frame proposal and an examination of pliability of the frame. The calculation was carried out in MAPLE 11 software.
|
|
|
Strain, stress and strength analysis of the frame construction.
Hrubý, Jaroslav ; Vlk, Miloš (referee) ; Vrbka, Jan (advisor)
This work deals with the stress and strain calculation as well as with the safety evaluation at the plane (2-D) frame loaded by the individual force F. The aim of this work is not acquiring the use of cutting-edge computer programs to determine the stress and deformation, but to learn how to use practically the basic calculation methods being taught at the subject Strength of materials to get practical experience with the application of these calculation methods.
|
|
|
Residential Complex in Brno - Komín
Preininger, Petr ; Vrbka, Jan (referee) ; Makovský, Zdeněk (advisor)
The locality is one of the most desired in the city of Brno and its outskirts. My goal was to create an enclosed city block (a district in a district), where the neighbours know each other and therefore create a strong community. To ensure some degree of privacy I have divided the continuous longitudinal house block, which highlights the descend of the land, into separated groups of 3 to 6 terraced houses. To the groups I have then assigned shared gardens which together give impression of being one unit. The plot itself has the biggest value in todays state. The end of the village seamlessly turns into forrest which makes up for a barrier of some sort. The quality of the location lays in the contact with the forrest. That is the reason why I have decided to lower the building area under the visual horizon and keep the gardening colony, although on the roofs of the buildings.
|
|
|
The analysis of educational portals for the area of ICT profession.
Vrbka, Jan ; Šedivá, Zuzana (advisor) ; Benáčanová, Helena (referee)
This diploma thesis deals with electronic educational portals and their applicability in the area of ICT. The aim is to determine key knowledge and skills of ICT professionals and assign those to courses from educational portals. The work is divided into theoretical and practical part. The theoretical part consists of definitions of issues elaborated in this work. The particular attention is paid to education and e-learning. Practical part seeks to match key professional knowledge and skills with each ICT professions. In this part graduates'depth of knowledge and skills required by employers are also described. The employers' requirements date to years 2006 and 2010. In the end of the thesis educational portals with most extensive supply of ICT courses in the Czech Republic are listed. From the supply of portals are chosen those courses which follow the knowledge from previous chapters. Consequently, these portals are compared.
|
|
|
Information and the information society
Vrbka, Jan ; Rosický, Antonín (advisor) ; Brixí, Radim (referee)
This paper deals with the substance of the word "information" and its influence on the formation of information society. It also focuses on the resources from which the information is acquired with an emphasis on the Internet and its trustworthiness. In the paper there are various aspects of the information society and more importantly the topic of financial crisis connected with the informatization issue. Ultimately, there are instructions how to proceed when checking the trustworthiness of information.
|
guest ::
