|
| |
|
|
230 V inverter for isolated mains supplied from solar cells
Michálek, Pavel ; Procházka, Petr (referee) ; Martiš, Jan (advisor)
In this thesis is presented detail design of power part of DC/DC converter and output inverter. This device will serve for creating an artificial network in a family house where it will be used for supplying selected household appliances which are designed for use in AC network. The converter will be supplied with DC voltage. This tension will be obtained from a system of photovoltaic panels. The output voltage will have alternate character and it will be close to the network voltage 230 V/50 Hz. In the introductory part of thesis are discussed possible topologies of converters and output inverters. Subsequently are designed individual parts of supply inverter. In the final part there are shown waveforms of important values and is given a thesis evaluation.
|
|
|
Removing baseline wander in ECG with empirical mode decomposition
Procházka, Petr ; Kolářová, Jana (referee) ; Kubičková, Alena (advisor)
In this semestral thesis, realizations of chosen linear filters for baseline wander are described. These filters are then used on artificial ECG signals from CSE database with added baseline wander. These methods are compared and results are evaluated. After that, literature search of Empirical mode decomposition method is utilized. Realization of designed filters in MATLAB programming language are described, then results are evaluated with respect to filtration success.
|
|
|
Three-phase inverter for high-speed induction motor
Pinďák, Michal ; Knobloch, Jan (referee) ; Procházka, Petr (advisor)
The goal of this master´s thesis is primarily the theoretical analysis of three-phase inverters and subsequent familiarization of the reader with their detailed practical structure. The first part is devoted to the general definition of the power semiconductor converter as such. The following part describes the principle of three-phase pulse width modulation including the widely used principle of scalar control of induction motors. The second half of the thesis is already focused on the practical design of a three-phase inverter for a 50 kW high-speed induction motor. This section explains the problem of sizing and selecting all of the sub-elements of the inverter based on the parameters specified by the end user of the device.
|
|
|
Frequency inverter for small induction machine
Pavlík, Ondřej ; Procházka, Petr (referee) ; Červinka, Dalibor (advisor)
The aim of this diploma thesis is to continue in prototype realization and a final proposition of three-phase frequency transformer pilot projected in scope of my bachelor work. This transformer is outlined for a small unsynchronized engine to 100 watt output and is designed to supply the fan motor. This suggestion was optimalized from the standpoint of bargain low price and technical feasibility. Powerful part of transformer is solved with help of circuit FSB50450 which is fed from compact source MYRRA 47155. Steering system is guaranteed with circuit MC3PHAC. This device is possible to use in less demanding applications where it was resisted by high expensive price of common frequency transformers.
|
|
|
BLDC Motor Control Module
Morávek, Lukáš ; Cipín, Radoslav (referee) ; Procházka, Petr (advisor)
Diploma thesis describes design and realization of hardware and software for controlling and regulation of the high-speed drive with BLDC motor, which will serve as a spindle for CNC milling machine. The thesis described in detail the schematic design and the design of printed circuit board of the power part, control part and power supply part of the three-phase transistor inverter controlled by DSP processor. It is also described in detail program of DSP processor for controlling and regulation of the BLDC motors, which the function is verified by the final measurements. The result of Diploma thesis is functional high-speed drive with BLDC motor.
|
|
|
Multipurpose power supply for electroplating system
Pinďák, Michal ; Vorel, Pavel (referee) ; Procházka, Petr (advisor)
The aim of the bachelor thesis is the practical proposal of the multipurpose power supply for the electroplating system. The individual technological processes of electroplating, for which the parameters of the source have to be adapted, are presented in the theoretical part. This part includes the entire division of pulse DC/DC converters without a transformer from the aspect of working quadrants and finally the ways of their controlling. There is also introduced the analysis of parameters of the presumed DC power supply XP Power HDS3000PS60. The conclusion of the thesis is focused on the entire proposal of converter wiring, its construction and subsequent commissioning through the software LabVIEW.
|
|
|
Auxiliary power sources in electric traction
Kuzdas, Jan ; Procházka, Petr (referee) ; Červinka, Dalibor (advisor)
The purpose of this thesis is proposal of auxiliary power sources in electric traction. Specifically we deal with two converters. Both of them were used in traction vehicle's applications, which are developed by the Department of Power Electrical and Electronic Engineering, Brno University of Technology. First converter was used as a power supply in secondary traction mechanism of electric locomotive. Second one to power supply of dash board in automobile with fuel cells.
|
|
|
Design of drive for electric powered tricycle
Filipec, Petr ; Pazdera, Ivo (referee) ; Procházka, Petr (advisor)
This work deals with designs of drive for two types electric powered tricycles (type for outdoor and indoor). Designs comprise general conception of drive. We selected optimal electric motors in terms of research electric engines and calculations. Next, we proposed batteries. The last part describes design power circuit and general financial expenses.
|
|
|
Design of single-purpose assembly machine for assembly of gas distributor in gas grill
Procházka, Petr ; Pavlík, Jan (referee) ; Knoflíček, Radek (advisor)
Objective of this thesis is creating the construction of one-purpose assembly machine for combination of gas switchboard in gas grill assembly, which is top part of the gas cooking grill, consisting of stainless steel plate and burners. There are three types of burners, one small type, two medium types and one big type. Each consists of aluminium body, nozzle, ignition electrode and gas leakage protection fuse. Prior to construction itself, variant solutions of the assembly operations arrangement are designated. From those, the most appropriate one is chosen based on multicriteria weighting method. Construction of assembly line is created using 3D modelling program with necessary design calculations. For selected assemblies and parts, a drawing documentation has been created. Risk analysis and security of the machine’s normal operation is an integral part of the thesis. Risk analysis is created for the machine’s normal operation. In conclusion, the costs of purchasing the assembly line are calculated and the return of the investment for purchasing the machine is assessed.
|
guest ::
