|
|
Renewable sources of energy for residential houses.
Bergr, Josef ; Počinková, Marcela (referee) ; Formánek, Marian (advisor)
Aim of the bachelor thesis „Renewable soucers of energy for residential houses“, is the choice of the best alternative heat sources for heating and for hot water from a financial point of view. Therefore, a significant part of the thesis dedicated to economic assessment. In the first part are selected each combination of systems that will be rewarded in the second part are calculated total financial costs over the life of the individual systems. It selected the cheapest system that is subjected to detailed analysis and prepare a chart of financial costs, which is more accurate and performs its design and implementation project. The theoretical part of the legislation mentions and describes the approach to the design of renewable energy and other section is a brief overview of this issue.
|
|
|
Optimization of heat generators for residential house
Smola, Vojtěch ; Horák, Petr (referee) ; Formánek, Marian (advisor)
This diploma thesis solves design of heating in a residental building. This work is focused on the selection of appropriate one of the two options a heat source, which are cascade heat pumps ground-water and gas condensing boilers. The theoretical part of the diploma thesis deals with introducing to the issue of heat pump systems. The functional principle of the widely most used types and particularized type ground-water. In the practical part calculation and design of heating system with selected heating source that is cascade of gas condensing boilers.
|
|
|
Heating of multifunkcional building
Kořenková, Veronika ; Formánek, Marian (referee) ; Počinková, Marcela (advisor)
The goal of this bachelor thesis is to introduce a heating system solution for multifunctional building. Thesis is divided into theroretical, calculation and project parts. Theoretical part is focused on the definition of fittings in heating systems. Second part depict the proposal of heating system and heat preparation of the multifunctional building, which contains veterinary clinic and housing units. Gas condensing boiler is chosen as a source of heat. The building is heated by steel panel radiators and towel rail radiators. Preparation of hot water is done by two indirect heating water storage tanks. Preheating of water is supported by solar collectors. Project part of the thesis contains technical report and drawing, based on the calculation part.
|
|
|
Cooling systems in buildings multipurpose buildings
Hobza, Lukáš ; Vlček, Petr (referee) ; Formánek, Marian (advisor)
This Bachelor Thesis deals with cooling systems of housing units and an adjacent wine shop. The theoretical part of the thesis is focused on the principle of working ordinarily used cooling systems and options of productions of cold. The thesis describes advantages and disadvantages of individual systems. The result of the computational part is a design of the optimal cooling system for the multifunctional building which secures a diversion of a thermal load in a summer season and the overall design of the cooling system.
|
|
|
Hot Water Distribution with Using of Heating Cable
Březinová, Lucie ; Formánek, Marian (referee) ; Formánek, Marian (referee) ; Wierzbická, Helena (advisor)
Master´s thesis is about hot water distribution with using of heating cables. This work is divided into three parts. First part is main function of heating cables, second part is about solution and suggestion of water supply, including hot water heater in two different objects. Important thing is difference a variant of the heating cable and without it. The last part is experimental, whose task is to verify the properties of the cable.
|
|
| |
|
|
Design and optimization of heat pump operation
Bergr, Josef ; Šikula, Ondřej (referee) ; Formánek, Marian (advisor)
The aim of the thesis "Design and optimization of the heat pump" is the project documentation for building permits, finding a suitable source of heat and cold. The problem is solved for a Tesco hypermarket. The device is designed to meet the health, performance and functional requirements for indoor climate. The task of this device is to transport fresh air into the interior cover heat losses in winter and coverage heat gains during the summer. The theoretical part deals with the problem of heat pumps. Special mention is about heat pump air x air. Calculation and design part is a specific proposal, two air conditioners and optimizing for winter. The experimental part deals with the processing of data on existing rooftop units.
|
|
|
Draft cooling system for food
Doležal, Jan ; Vlček, Petr (referee) ; Formánek, Marian (advisor)
The bachelor thesis deals with the cooling systems of food premises. The theoretical part focuses on the issue and various possibilities of direct cooling. The result of the calculation is design of optimal cooling system for object to poultry processing.
|
|
|
Performance of heat
Kocandová, Karolína ; Formánek, Marian (referee) ; Počinková, Marcela (advisor)
The topic of the diploma thesis is the operational efficiency of heat sources . The thesis is divided into three parts. In the first part a theoretical solution of the heat sources efficiency can be found. In the second part there is a calculation solution of the project. The project solves the heating of a football stadium. Two variants of the heating source and warm water preparation are suggested and the variants are consequently compared and evaluated. The last part is experimental - the topic of the experiment is the efficiency of heat sources.
|
|
|
Operation and management of shower heat recovery exchanger
Veselská, Monika ; Vendlová, Lucie (referee) ; Formánek, Marian (advisor)
This thesis deals with the operation and management of shower recuperative heat exchangers, energy recovery from them and further use of this energy. This work is divided into four parts. The first presents the possibilities of using energy from wastewater. The second part deals with the design possibilities of energy recovery from waste water in the building, design water and sewer . The third part is devoted to the specification of the shower regenerative heat exchanger, its operation, regulation and control, culminating in economic evaluation of the proposed exchanger. The last part is a technical report and annexes drawings of the project.
|
guest ::
