|
|
Multi-purpose apartment house in Ilava
Hoferica, Ivan ; Průša, David (referee) ; Štěpánek, Ladislav (advisor)
This bachelors thesis deals with theproject documentation for the construction of a multi-purpose apartment house in Ilava. The apartment building is designed as a partial basement with four floors. On the first floor there are two establishments, a shoe store and a dentists office. Each of these spaces has a separate entrance, there is also a separate entrance to the residential part of the house. All entrances to the building are barrier-free. On the second to fourth floors there are a total of six residential units, two on each floor. In the basement there are common areas for tenants, namely a cellar, a common room, a workshop and a technical room.
|
|
|
Apartment building by the lake
Hanečáková, Barbora ; Průša, David (referee) ; Sukopová, Dáša (advisor)
The subject of this bachelor thesis is a new apartment building and the process of documentation of implementation of building an apartment house in Veľký Biel, area Malý Biel, cadastre unit Senec. The apartment building is located in a quiet part of a town, near the lake. This object is detached with a cellar and three floors. The object consist of five dwelling units, from witch two was designed for accesible usage. Vertical supporting structures in the above-ground floor are made of ceramic blocks Porotherm, in basement they consist of blocks of permanent formwork blocks. The object is based on concrete foundation strips and roofed with warm flat roof.
|
|
|
Detached house with business premises
Češka, Ondřej ; Průša, David (referee) ; Sukopová, Dáša (advisor)
The aim of my bachelor thesis is to design and elaborate project documentation for building of a family house with a design office. The building of the family house is located in the cadastral area of Mikulovice near Pardubice. It is a two-storey, partly basement detached house, which corresponds to the conditions of operation of the building. The family house is designed for a family of four. On the 1st floor there is a WC + bathroom with a technical room and a gym. On the 1st floor there is a design office, which is intended for the homeowner, then a kitchen, a living room, a guest room with its own dressing room, a workshop connected with the garage. On the 2nd floor there is a living area consisting of three rooms and a studio. The structural system of the building is designed from the POROTHERM system with an external contact insulation system ISOVER GREYWALL with a thickness of 120 mm. Vertical load-bearing peripheral structures of 1st floor, 1st floor and 2nd floor will be made of POROTHERM 30 P + D. The inner bearing walls are made of POROTHERM 30 P + D and POROTHERM 19 AKU and POROTHERM 11,5 PROFI are used for non-bearing masonry. The exterior plaster is a CEMIX FLEXI thin-film, water-repellent, fluted with 2 mm grain in light gray. The staircase is designed with reinforced concrete monolithic. The horizontal load-bearing structures consist of the ceramic-concrete system POROTHERM (beams Pot and inserts Miako) th. 250 mm. The roof is gabled with TONDACH Hranice 11 roofing in black. Doors and windows are designed in gray and white, garage doors are designed in gray. Floor coverings are designed taking into account the use of individual rooms, namely ceramic tiles and laminate flooring. The main goal of my work was to solve the disposition for the given purpose, ie to design a suitable construction system and to draw up the drawing documentation including the text part. The bachelor thesis is processed in the form of project documentation for construction.
|
|
|
Apartment house in Pacov
Tománek, Ladislav ; Průša, David (referee) ; Brzoň, Roman (advisor)
The aim of the bachelor´s thesis is to elaborate the documentation for the construction of the apartment house and terraced garages. The location of the designed building is in Sídliště Míru street, in the town of Pacov. The apartment house has three above-ground floors and one underground floor. Fourteen housing units are designed in the above-ground floors, while the underground floor consists of a technical background of the house and a cellar units. On the plot area, there are also designed open-air parking spaces and a children's playground. The apartment house is based on on strip foundations. The structural system of a building is designed from walls with monolithic reinforced concrete ceilings. The load-bearing walls of the above-ground floors are designed from HELUZ ceramic blocks and the load-bearing walls of the underground floor are solved by permanent formwork. The building is isolated with an external contact insulation system, internationally referred to as ETICS. The roof is designed as warm flat roof. Terraced garages are designed as two separate buildings, each with seven garage spaces. Load-bearing and partition walls will be made of HELUZ ceramic blocks. The foundation will be based on foundation strips and roofing with warm flat roof.
|
|
|
Apartment building with café
Šubová, Adriana ; Průša, David (referee) ; Brzoň, Roman (advisor)
The subject of this bachelor thesis is the elaboration of documentation for the construction of an apartment building in Rožnov pod Radhoštěm. It is a detached object on a slightly sloping terrain. The apartment building is designed as a classic brick building with five floors and flat roof. The building has twelve flat units, a café, home furnishings and technical facilities.
|
|
|
Apartment building in Vlašim
Maršoun, Jiří ; Průša, David (referee) ; Brzoň, Roman (advisor)
This Bachelor’s thesis elaborates the project documentation for the construction of an apartment building in Vlašim, located in the Central Bohemian region. It’s about separated standing basement object. Apartment building has one basement and three above-ground floors, where is eight apartment units in total, from which one is designed for people with movement disabilities. The object is based on RC foundation slab. Design of a vertical structure is from limestone blocks with thermal insulation ETICS from expanded polystyrene. Horizontal load-bearing structures are designed as cast-in-place reinforced slabs. The building is roofed with a warm flat roof.
|
|
|
Identification of Thermal Conductivity and Thermal Capacity of Building Materials by the "Hot Wire Method"
Průša, David ; Čermák,, Jan (referee) ; Šťastník, Stanislav (advisor)
This aim of task deals with study of heat dissipation mechanisms and the description of physical phenomena, which is accompanied by non-stationary measurement of thermal characteristics by the method "hot-wire method". In particular, we observe the coefficient of thermal conductivity and its dependence on various variables such as the temperature of the measured sample, its moisture state, the volume of the sample and its porosity. The above mentioned findings are used for the invention of the measuring device of a nonstationary gauge, which is based on regular heating and is dedicated to measuring the thermal conductivity coefficient and the heat capacity by the "hot-wire method" method. In the last part of the thesis is verified functionality of the proposed measuring device, the suitability of the created algorithm for the processing of the measured data and the evaluation of the results was verified. The reproducibility of the measurements was verified and the measured results were compared with the measurement methods, which are commonly used. the influence of humidity on the coefficient of thermal conductivity.
|
|
|
Identification of Thermal Conductivity and Thermal Capacity of Building Materials by the "Hot Wire Method"
Průša, David ; TROJAN,, Karel (referee) ; Šťastník, Stanislav (advisor)
This aim of task deals with study of heat dissipation mechanisms and the description of physical phenomena, which is accompanied by non-stationary measurement of thermal characteristics by the method "hot-wire method". In particular, we observe the coefficient of thermal conductivity and its dependence on various variables such as the temperature of the measured sample, its moisture state, the volume of the sample and its porosity. The above mentioned findings are used for the invention of the measuring device of a nonstationary gauge, which is based on regular heating and is dedicated to measuring the thermal conductivity coefficient and the heat capacity by the "hot-wire method" method. In the last part of the thesis is verified functionality of the proposed measuring device, the suitability of the created algorithm for the processing of the measured data and the evaluation of the results was verified. The reproducibility of the measurements was verified and the measured results were compared with the measurement methods, which are commonly used. the influence of humidity on the coefficient of thermal conductivity.
|
|
| |
|
|
Implementation of statistical methods in quality management in a chosen organization
Průša, David ; Aleš, Zdeněk (advisor) ; Hladík, Tomáš (referee)
The masters thesis Implementation of statistical methods in quality management in chosen organization is divided into two parts. The first part deals with the theoretical preparation for the second practical part. The theoretical part consists of a literature review of currently used statistical methods in quality control according to ČSN ISO/TR 10017 and a description of the standards used in quality management. Furthermore, this section describes the seven basic tools of quality management. The second part is devoted to the presentation of the selected organization, describing the current state of evaluating the quality of the production, presentation of selected manufacturing process and product, application of control charts and economic evaluation. At the end of this thesis, the results are evaluated and there was a proposal for an appropriate strategy.
|
guest ::
