|
|
Modeling and analogue implementation of memristor
Teska, Tomáš ; Kolka, Zdeněk (referee) ; Biolek, Dalibor (advisor)
This bachelor´s thesis deals with an analogue implementation of memristor. Memristor is the fourth foundamental passive element whose existence was predicted by Leon Chua in 1971. In the first step, the summarization of basic information and characteristics of memristor is done. The next part presents the possibilities of its realization from design and simulation to measurements on samples. Two variants of analogue models using modern active elements are selected for practical implementation.
|
|
|
Active Frequency Filters for Higher Frequencies
Fröhlich, Lubomír ; Dostál, Tomáš (referee) ; Biolek, Dalibor (referee) ; Sedláček, Jiří (advisor)
This thesis deals with the synthesis and optimization of frequency analogue filters with modern active elements usable for higher frequencies. The thesis is divided into three parts, the first part deals with the problematic concerning Leap-Frog combined ARC structure. Due to a difficult design, this method is not described in a detail and used in practice, although it shows e.g. low sensitivity. Firstly, a complete analysis of individual filters was made (for and T endings) and consequently these findings were used during implementation of this method to NAF program. Finally, samples of real filters were realized (for verification of functioning and correct design). Another very interesting topic concerning filters is usage of coupled band-pass for small bandwidth, where it is necessary to solve the problems concerning ratio of building elements values, but also price, quality, size of coils, sensitivity, Q factors, coefficients etc. That is why in practice a coil is very often substituted with other equivalent lossy and lossless blocks which create ARC filters structure. The design and the possibility of usage of lossy grounded elements were described here (such as synthetic inductors, frequency dependent negative resistor). Some parts of the design are individual computer sensitivity analysis, setting of usage and quality comparison of individual lossy grounded blocks. Besides, a program for these elements was created, it is useful for a quick design and depiction of transfer characteristics. The third part deals with the usage of tuning universal filters consisting three or more operational amplifiers, which secures its universality and possibility to create different kinds of transfer characteristic. In practice, Akerberg - Mossberg and Kerwin - Huelsman - Newcomb are the most used types of filters. These were also compared with less common universal filters. In the end, the possibility of digital tuning of universal filter with the help of digital potentiometers for filters of 10th order and frequency around 1 MHz was shown.
|
|
|
Circuits for Analog Signal Processing Employing Unconventional Active Elements
Khatib, Nabhan ; Brzobohatý, Jaromír (referee) ; Zaplatílek,, Karel (referee) ; Biolek, Dalibor (advisor)
Disertační práce se zabývá zaváděním nových struktur moderních aktivních prvků pracujících v napěťovém, proudovém a smíšeném režimu. Funkčnost a chování těchto prvků byly ověřeny prostřednictvím SPICE simulací. V této práci je zahrnuta řada simulací, které dokazují přesnost a dobré vlastnosti těchto prvků, přičemž velký důraz byl kladen na to, aby tyto prvky byly schopny pracovat při nízkém napájecím napětí, jelikož poptávka po přenosných elektronických zařízeních a implantabilních zdravotnických přístrojích stále roste. Tyto přístroje jsou napájeny bateriemi a k tomu, aby byla prodloužena jejich životnost, trend navrhování analogových obvodů směřuje k stále většímu snižování spotřeby a napájecího napětí. Hlavním přínosem této práce je návrh nových CMOS struktur: CCII (Current Conveyor Second Generation) na základě BD (Bulk Driven), FG (Floating Gate) a QFG (Quasi Floating Gate); DVCC (Differential Voltage Current Conveyor) na základě FG, transkonduktor na základě nové techniky BD_QFG (Bulk Driven_Quasi Floating Gate), CCCDBA (Current Controlled Current Differencing Buffered Amplifier) na základě GD (Gate Driven), VDBA (Voltage Differencing Buffered Amplifier) na základě GD a DBeTA (Differential_Input Buffered and External Transconductance Amplifier) na základě BD. Dále je uvedeno několik zajímavých aplikací užívajících výše jmenované prvky. Získané výsledky simulací odpovídají teoretickým předpokladům.
|
|
|
Current-Input Current-Output Active Circuit Elements and their Applications
Vávra, Jiří ; Sedláček, Jiří (referee) ; Maschke, Jan (referee) ; Biolek, Dalibor (advisor)
The thesis deals with definitions of new current- or mixed-mode circuit elements and their implementations and applications. Based on the analysis of the state-of-the-art, novel application circuits employing the above circuit elements are designed. For the purpose of the experimental verification, the active elements are implemented via commercial integrated circuits, and their applications are simulated via PSpice. The application circuits are focused on frequency filters, rectifiers, oscillators, and current-copy circuits. Selected applications are analyzed with respect on real influences, and measurements on circuit prototypes are also performed.
|
|
|
Unconventional Circuit Elements for Ladder Filter Design
Shaktour, Mahmoud ; Dobeš,, Josef (referee) ; Mišurec, Jiří (referee) ; Biolek, Dalibor (advisor)
Kmitočtové filtry jsou lineární elektrické obvody, které jsou využívány v různých oblastech elektroniky. Současně tvoří základní stavební bloky pro analogové zpracování signálů. V poslední dekádě bylo zavedeno množství aktivních stavebních bloků pro analogové zpracování signálů. Stále však existuje potřeba vývoje nových aktivních součástek, které by poskytovaly nové možnosti a lepší parametry. V práci jsou diskutovány různé aspekty obvodů pracujících v napěťovém, proudovém a smíšném módu. Práce reaguje na dnešní potřebu nízkovýkonových a nízkonapěťových aplikací pro přenosné přístroje a mobilní komunikační systémy a na problémy jejich návrhu. Potřeba těchto výkonných nízkonapěťových zařízení je výzvou návrhářů k hledání nových obvodových topologií a nových nízkonapěťových technik. V práci je popsána řada aktivních prvků, jako například operační transkonduktanční zesilovač (OTA), proudový konvejor II. generace (CCII) a CDTA (Current Differencing Transconductance Amplifier). Dále jsou navrženy nové prvky, jako jsou VDTA (Voltage Differencing Transconductance Amplifier) a VDVTA (Voltage Differencing Voltage Transconductance Amplifier). Všechny tyto prvky byly rovněž implementovány pomocí "bulk-driven" techniky CMOS s cílem realizace nízkonapěťových aplikací. Tato práce je rovněž zaměřena na náhrady klasických induktorů syntetickými induktory v pasivních LC příčkových filtrech. Tyto náhrady pak mohou vést k syntéze aktivních filtrů se zajímavými vlastnostmi.
|
|
|
GPS car position system
Talanda, Oldřich ; Biolek, Dalibor (referee) ; Kadlec, Jaroslav (advisor)
This paper focuses on one of the possible ways of protecting a car as well as offering a possibility of easy location detection anywhere in the Czech Republic.The aim of the paper is to suggest and practically realize a device, that would meet these requirements by utilizing the GPS and GSM technologies. The first part of the paper is focused on laying out the problem. The next part tries to familiarize one with the problems of GPS navigation, work with microcontrollers and data transfer utilizing the GSM technology. The third part deals with program equipment of the microcontroller and the governing communication system.
|
|
|
Low-power emulators of higher-order elements
Teska, Tomáš ; Brzobohatý, Jaromír (referee) ; Biolek, Dalibor (advisor)
The thesis deals with emulating higher-order elements using the transformation mutators, which were described by Leon Chua in 1971. The procedure of designing mutators from their mathematical description to the synthesis of concrete electrical circuits is described. The circuit solutions are based on the utilization of advanced circuit principles in order to achieve optimal circuit performance. Mutators are implemented as a set of eight incremental modules. Via their cascade connection, it is possible to emulate arbitrary elements from the periodical table of higher-order elements. The proposed solutions are tested by means of computer simulations and also verified by measurements.
|
|
|
Frequency Domain Computer Analysis of Switched Circuits
Pech, Vladislav ; Novotný, Vít (referee) ; Biolek, Dalibor (advisor)
This project deals with the computer analysis of circuits with external switching. At the first of all there is a description of the creation of the entry of the program CIRNAM – description of the circuit, modified netlist. The work also discusses the theory used for solutions of analysed circuits. In the other part there is a description of the program CIRNAM in full details. In the next parts of this project there is the illustration of work in the program, which is shown on the examples with short discussion of output options – he rendering of the frequency characteristics in the program CIRNAM or the export of calculated data to MATLAB. There are also described the source code of CIRNAM for the initial orientation of the programmer, which would extend the possibilities of this program.
|
|
|
Internet schematic editor
Popelka, Lukáš ; Biolek, Dalibor (referee) ; Kadlec, Jaroslav (advisor)
The diploma thesis deals with creating of electronic schematics in editor using web interface. The editor generates electrical circuit text file according to Spice netlist specification. The program has been created in Java and takes an advantage of object oriented programming language. The editor is a part of a web page and is executable as an applet. The diploma thesis describes a programming language selection, program layout and implementation. Thesis contains programming code examples, window illustration and component drawings. Depth-first search algorithm has been used for nodes number assignment. An OrCAD PSpice reference guide was used for netlist.
|
|
| |
guest ::
