|
|
VBS macros for TIA portal V12 applicable to panels COMFORT respectively RT
Benešl, Tomáš ; Arm, Jakub (referee) ; Pásek, Jan (advisor)
The aim is to create a VBS macros for working with databases, which will be managed phonebook and SMS messages and using a GSM module to send and receive messages. Create scripts for operations with alarms - seting and automatically sending. VBS macros for working with data CSV files and also create a way to control the barcode reader. Create a test application with the macros and test it in practice.
|
|
|
Monitor for Wireless M-Bus
Baštán, Ondřej ; Arm, Jakub (referee) ; Šťastný, Ladislav (advisor)
The thesis proposes a battery-powered devices to monitor and record communications Wireless M-BUS. Work describes how the communication protocol M-BUS, and the related wireless communication protocol Wireless M-BUS and selection of appropriate hardware for the design of the equipment in question. Work also deals with the design and creation of firmware that matches the selected hardware and purpose solutions.
|
|
|
Diagnostic sensors in transportation systems
Tylich, Ladislav ; Arm, Jakub (referee) ; Hynčica, Ondřej (advisor)
The objective of this thesis is to get familiar with wireless networks standards and with standard IEEE 802.15.4. and communication principle in wireless sensor networks in short distances and create overview of RF chips in (300-1000)MHz with their comparrison. To choosen transciever modul create software. Main goal is to create module to measure and logging data from vibration harvester. Assessments based on measurements.
|
|
|
Bandsaw Control System
Filipský, Dalibor ; Arm, Jakub (referee) ; Jirgl, Miroslav (advisor)
This paper describes the design of a control system for a band saw. Content of work can be divided into five parts. The first part contains introduction to the basic functions of a band saw, it’s division and structures. Furthermore, the construction and parameters of a band saw created by an amateur and to which the control system is designed. The second part is dedicated to the design and creation of simulators for bandsaw function, both manual control mode and the automatic mode. The third part deals with the analysis of the risks associated with safety and operational reliability of the device. The fourth part focuses on the design of control algorithms for programmable controller and creating a suitable simulator that will represent a real physical device. In fifth part, designed algorithm is applied and tested on created simulator for bandsaw.
|
|
|
Gantry crane control via Modbus TCP
Arm, Jakub ; Štohl, Radek (referee) ; Kaczmarczyk, Václav (advisor)
Modbus TCP is a protocol for communication via ethernet bus. Goal of this work is realization of control of gantry crane model from personal computer. It is accomplished by Modbus converter, which communicates via ethernet bus. There are two ways of controlling. By graphic user application written in C# or by web pages running on created HTTP server. All services use created library, which is written in C language and communicates via Modbus TCP with Modicon Momentum unit. This unit interprets orders in form of Modbus protocol to controlling of standard industry inputs and outputs for process instrumentation. This process instrumentation is binded to control the gantry crane model.
|
|
|
Simulators of boxes, parking and drill laboratory models in Control Web
Jaroš, Jiří ; Arm, Jakub (referee) ; Jirgl, Miroslav (advisor)
The subject of this bachelor thesis is creating of simulations and simulators of three laboratory models such as box sorting machine, parking lot and pedestal drill in a Control Web. According to the model tasks in the TIA programme, there are also samples of control programmes created. Used programmes, individual models, control electronics, all of the simulations and simulators are described here. Control programmes created in the TIA Portal are also included in the attachment.
|
|
|
Simulators of balls and trunks laboratory models in Control Web
Chalupa, Petr ; Arm, Jakub (referee) ; Jirgl, Miroslav (advisor)
The aim of this bachelor’s thesis are creation of two program, able to simulate and visualize actions on laboratory models sorter logs and dosing balls. These models are used to learning PLC programing. In first part is deal with program Control Web. The next part describes both of models, their schema and functions. The following part describe creation and work of program, which I made. The last part of this work is deal with connection both programs with PLC by using MODBUS.
|
|
|
Control of smart house model
Becová, Lucia ; Arm, Jakub (referee) ; Štohl, Radek (advisor)
My thesis deals with the control of intelligent and comfort house. The first chapter contains a model of the irrigation system , recovery of the electronics and simple applications for testing. The second chapter deals with the recovery model of gate and garage doors. The third chapter is focused on the management of lighting in the house and its surroundings. The fourth chapter is devoted to visualization via the Power Panel PP481.
|
|
|
Modernization of Vulcanization Press Control
Sáblík, Patrik ; Jirgl, Miroslav (referee) ; Arm, Jakub (advisor)
This thesis deals with the design of the controller system for modernisation of operating the vulcanising press with the usage of the control through the PLC designed by Teco a.s. First part of the thesis describes requirements and functions of a vulcanising press. It contains a background research of needed components from three different producers of the PLCs. Next step is a design of the operating system. It contains the PLC programme and design of the regulators of the press forms temperature. The last part is concerned with wiring of all the components, their activation and checkingout eventual failures of the designed programme.
|
|
|
Robotic Video Camera Control Using Beaglebone
Chmelař, Jakub ; Franek, Lešek (referee) ; Arm, Jakub (advisor)
This bachelor thesis describes HW and SW equipment of the development board BeagleBone Black and its AM3358 processor. The processor integrates two programmable support units for real time control. This work provides detailed overview of the development board and the support units control possibilities. It includes description of principles of the support units usage and definition of Device Tree configuration file. Purpose of the work is to create SW and HW equipment for the model of robotic camera. This work also describes DPS design and program equipment for stepper motor control using the support units of the AM3358 processor. Additionally the extension of MJPG-Streamer with support unit control possibilities is described at the end of the work.
|
guest ::
