|
|
Thermal sensors communication with CPLD using SMBUS
Tonar, Karel ; Rumánek, Jaroslav (referee) ; Kováč, Michal (advisor)
The goal of bachelor’s thesis is the introduction with two - wire circuit communication on the SMBUS, it is concretely related to alternate communication of FPGA with thermal sensors. The bachelor’s thesis also contains the choice of optimal thermal sensor, the proposal of module for measuring the temperature and proposal of programme for Programmable Logical Device. The programme processes data from the modules of temperature measurement and data are indicate on LED display. The programme makes it possible to display minimum, maximum and average temperature during certain time interval. All of programmes are implemented for logical device in VDHL language. The thermometer sends data to Personal Computer over UART interface. There is temperature displayed and storaged once again. During working on this bachelor’s thesis was used SPARTAN-3 starter board and design system Xilinx ISE 9.2i.
|
|
|
High speed acquisition system
Svoboda, Tomáš ; Kováč, Michal (referee) ; Kubíček, Michal (advisor)
This master's thesis is focused on the design of a highspeed aquizition system which is based on FPGA and a highspeed AD converter with modern JESD204B interface. Considering the requirements, such as high samplig rate, the current range of available devices is limited. Therefore the market overview of the modern IC and modules was made. The resulting design is based on available modules, so the rached sampling rate is up to 5 GSa/s with 12bits resolution. Data from measurement are send to PC via Ethernet which uses lwIp stack and TEMAC core on Microblaze proccessor.
|
|
|
Business Plan - Introduction of a New Product on the Market
Hajtmar, Adam ; Kováč, Michal (referee) ; Heralecký, Tomáš (advisor)
The diploma thesis is focused on the elaboration of a business plan for placing a product on the market. It is a robotic device for the maintenance of single-wheel rails. The equipment will be placed on the Czech market by companies that will be newly created for this purpose. The business plan will be based on experience from joint machine research as well as relevant analyzes. The plan is therefore aimed at the company successfully completing its entry into the Czech market.
|
|
|
Stepper motor control using CPLD
Daněk, Jan ; Kolouch, Jaromír (referee) ; Kováč, Michal (advisor)
The aim of my bachelor thesis was the control of CPLD stepper motor. To create a radio controlled antenna rotator. The controlling is done by a computer using RF circuits. The thesis includes a construction and principles of stepper motor. Basic structures of CPLD circuits were applying to create the control circuit. The possibilities of sensing the position and the data storage circuit were discussed. The control program in VHDL was implemented in development boards. The development board is connected to radio receiver circuit and the stepper motor driver. A transmitting board was connected to a personal computer or other device using RS232 interface. Printed circuit boards for transmitter and receiver circuits were created. The PC program was designed for data transmission. The program sends data and communicates via RS232 interface.
|
|
|
Creation of the Thematic Map in Method RTK
Kováč, Michal ; Bureš, Jiří (referee) ; Ježek, Jiří (advisor)
The bachelor thesis deals with the creation of the thematic map using the RTK method, finding an appropriate method for measuring inaccessible points. The locality of interest for geodetic surveying is Brno – Vinohrady, nearby Pálavské námestie. The result of this thesis is the thematic map created in scale of map 1 : 500, according to the directions for creating thematic maps.
|
|
|
Digital signal of pressure senzors processing using CPLD
Zátura, Michal ; Fedra, Zbyněk (referee) ; Kováč, Michal (advisor)
The goal of this bachelor’s thesis is to design electronic part of the scanning system used to measure altitude. The electronic part is designed as module connected to the development platform XC2-XL. This module is realized like PCB. The principles of the signal processing of the signal from the pressure sensor MPXH6250, particular blocks of the designed module and principle of the barometrical altitude measuring are also described in this thesis. Thesis briefly informs about designing environment Xilinx ISE, VHDL language, the principle and the application of the pressure sensors, the structure of the programmable logic device CPLD and FPGA, the development platforms XC2-XL, the Xilinx Spartan-3 Starter Kit, the programmable logic devices CPLD Coolrunner-II XC2C256 and Spartan-3 XC3S200 FPGA used on the development platforms. The very important part is to design algorithm for processing the logarithm in the digital logic and it´s implementation in VHDL language.
|
|
|
FPGA based sound card for PC
Štraus, Pavel ; Kováč, Michal (referee) ; Kubíček, Michal (advisor)
This project deals with implementation of a first order Sigma–Delta AD converter on the FPGA. This ADC is design for an audio signal processing. ADC is build up partially from digital blocks implemented in FPGA (programmed using VHDL) and from few analog components placed external to FPGA. Output from ADC is PCM signal. Data from ADC is created UDP datagram, which is sent to PC via network connection. Income data are received in created program, which save data to text file. This text file is processing in MATLAB.
|
|
|
Development of high resolution RGB camera
Madeja, Jiří ; Kováč, Michal (referee) ; Kubíček, Michal (advisor)
Tato práce se zabývá výběrem vhodného obrazového snímače pro použití v kameře snímající rostliny ve vysokém rozlišení a návrhem vhodného obvodu pro propojení vybraného snímače (SONY IMX253) s vývojovou deskou Avnet MicroZed. Tato práce pojednává o jednotlivých parametrech obrazových snímačů podle kterých je vybírán vhodný obrazový snímač. Je vysvětlen proces výběru vhodného obrazového snímače a podrobněji popsány parametry vybraného snímače. Je naznačena problematika návrhu elektroniky a plošných spojů z hlediska požadavků vysokorychlostních obvodů a citlivých a specifických součástek jako je obrazový snímač. Je nastíněna konfigurace a programování obvodu Xilinx Zynq a nakonec je provedeno zjednodušené teoretické ověření funkčnosti navrženého modulu.
|
|
|
IEEE802.15.4 and ZigBee technologies, examples of applications
Skládaný, Vojtěch ; Frýza, Tomáš (referee) ; Kováč, Michal (advisor)
The main goals of diploma thesis are application and realization of tool for projection and installation wireless networks according to IEEE802.15.4. The thesis is specialized in construction of transmitter and receiver device in term of mobility and visualization of data measured in terrain. Than the software support for measuring and control appropriate periphery are summarised and described. The system is defined in C programming language and uses OpenMAC library. Last part of thesis is focus on practical measurement and testing tool for projection and installation wireless network.
|
|
|
Development of innovative composite systems ETICS on the basis of a new generation of secondary raw materials
Kováč, Michal ; Ševčík, Milan (referee) ; Drochytka, Rostislav (advisor)
This master’s thesis applies utilization of alternative raw materials in thermal insulation system of the ETICS of new generation for houses. The theoretical part dealt with the explanation of the ETICS and the selection of suitable raw material for his innovating. In the following practical part were used selected materials to create a new thermal insulation made of straw and binding materials of cement, casein glue, bicomponent fibers and mushroom mycelium. At the end have been applied the variants of base coat of clay and mineral screed on new thermal insulation, from which was selected the optimal variant. From optimal thermal insulation and suitable base coat was conducted proposal of final version of new ETICS.
|
guest ::
