|
|
Reconstruction of middle part of the fuselage Z 143 aircraft using semi- monocoque frame
Zamazal, Jakub ; Mališ, Michal (referee) ; Píštěk, Antonín (advisor)
The thesis is focused on reconstruction of middle part of fuselage Z 143 aircraft from truss frame to semi-monocoque frame. In the thesis there is a conceptual design of semi-monocoque middle part of fuselage. The spars of centre wing section are strength controlled. In thesis there is weight analysis according to use the semi-monocoque middle part of fuselage. In second half of the thesis there is a study of retractable landing gear. The thesis shows weight savings according to use a semi-monocoque frame. The thesis also shows that semi-monocoque frame allows other option to upgrade Z 143 aircraft. This thesis can serve as a feasibility study of the reconstruction of the middle part of the fuselage Z 143 aircraft.
|
|
|
SDR-based UHF RFID communication analyzer
Vychodil, Josef ; Zamazal, Michal (referee) ; Povalač, Aleš (advisor)
Main topic of this thesis is development of software for capture and analysis of RFID communication in UHF band (standard EPC Class-1 Generation-2). One part of the work is focused on the basics of the RFID systems, software defined radio concept and graphical programming language LabVIEW. Main part of this thesis is discussing the developed software itself, its methods and principles. Next part is dedicated to present the graphical user interface of created application and its functionality. Last part of this thesis contains examples of captured and analysed processes in UHF RFID communication.
|
|
|
Signal Processing for UHF RFID Reader
Novotný, Jan ; Zamazal, Michal (referee) ; Povalač, Aleš (advisor)
The master’s thesis is focused on the UHF RFID reader EXIN-1 signal processing. The first part describes the concept of the EXIN-1 front end, its basic testing and possible communication interfaces for reader control and for receiving and transmitting baseband signals. The second part of this work is aimed to a simple description of EPCglobal Class-1 Generation-2 UHF RFID Protocol, especially to used modulations and codings. In the last part, a block connection between the front end and an ARM Cortex-M4 microcontroller discovery board is designed. The microcontroller is used for generating of all required signals and also for receiving incoming signals and processing them for identification numbers of RFID cards (tags), which are in the reading range of the reader. A decoding algorithm is designed in MATLAB software and implemented to the selected microcontroller. Obtained identification data are displayed on an LCD display and also sent to a PC through a serial communication.
|
|
|
WiFi and BT monitoring tool
Zelený, Miroslav ; Zamazal, Michal (referee) ; Valach, Soběslav (advisor)
This bachelor thesis deals with possibilities and ways of detection of devices using Bluetooth or Wi-Fi technology, with the possibility of future use for monitoring of human movement. Detection is only in the 2.4 GHz band. It introduces Wi-Fi and Bluetooth technology and their detection. Device detection was performed using Kismet software and Raspberry Pi platform.
|
|
|
UHF RFID tag emulator
Janošík, Tomáš ; Zamazal, Michal (referee) ; Vychodil, Josef (advisor)
This thesis deals with the design of external backscatter modulator for RFID tag emulator, which is used in UHF band. This modulator is connected with the Universal Software Radio Peripheral and antenna. Realization of a backscatter modulation contains switching between a matched load and an unmatched load. Impedance of the unmatched load is continuously adjustable. Result of this thesis is function prototype.
|
|
|
RFID bus-stop identifacation for sightless people
Straka, Radomír ; Zamazal,, Michal (referee) ; Dušek, Martin (advisor)
The aim of this master’s thesis is to design a device for identification of bus stops for blind people. In the beginning the work describes information about the RFID system, characterizes each part of this system, mutual communication of its components and evaluates possibilities of RFID communication frequency bands. Subsequently the work describes the block diagram of the device and the circuit scheme of each block. Work concentrates on a selection of circuit components for the RFID transceiver, the voice module, the control module and choose a suitable transponder to place it on metal constructions. Control programs are also described. PCB design of each board, partlists and source codes are in the appendices of this master’s thesis.
|
|
|
Low Noise Amplifiers for frequency range 1-3 GHz
Klegová, Hana ; Zamazal, Michal (referee) ; Kasal, Miroslav (advisor)
This masters thesis deals with low noise amplifier design for frequency range 1 GHz - 3 GHz. There is a short theoretical introduction in the first part of the thesis. There are described parameters and properties of transistors and general two-ports. Description of the noise characteristics two-ports follows. The next capture contains design of two-stage amplifiers. One of them is with a microstrip filter between stages and the second one is with combline filter on input of the amplifier. The amplifiers and the microstrip filter were designed in program ANSOFT Designer. The design of combline filter was realised in program CST Microwave Studio. Both amplifiers ware made and their properties ware compared with simulations.
|
|
|
RFID Reader for 13.56 MHz Band
Obšitník, Michal ; Zamazal, Michal (referee) ; Povalač, Aleš (advisor)
Cieľom tejto práce je navrhnúť RFID čítačku pre pásmo 13.56 MHz a zostaviť k nej riadiaci program. V prvej časti je najskôr práca smerovaná k oboznámeniu sa s princípom fungovania technológií RFID a NFC, spolu s tým súvisiacimi medzinárodnými štandardami a k oboznámeniu sa s rôznymi dostupnými čipmi na obsluhu týchto technológií. Keďže čip s ktorým sa bude pokračovať je jasne zadaný v návode, ich porovnanie slúži čisto oboznamovaciemu účelu. V praktickej časti je úloha navrhnúť a oživiť prototyp RFID čítačky. Základom je doska sprostredkúvajúca RFID komunikáciu, audiovizuálnu odozvu a pripojenie k OLED displeju. Táto doska je pripojená na mikrokontrolér na ktorý riadi celé ovládanie zariadenia. Súčasťou projektu je aj set rôznych antén, ktoré je možné na dosku pripojiť a zároveň ich vymieňať. Vyrobené antény sú podrobené testovaniu ako dve rozdielne metódy ladenia ovplyvnia ich chod. Testujú sa maximálna vzdialenosť čítania, úspech prevedených čítaní a hodnota prúdu, ktorá sa vznesie pri kalibračnom procese. Výstupom práce je RFID čítač s riadiacim programom.
|
|
|
Global Positioning System Signal Emulator
Hofman, Jan ; Zamazal, Michal (referee) ; Povalač, Aleš (advisor)
Thesis is adressed to the principals of a satellite navigation. It is focused on a determination of a longitude, latitude and altitude of a single point on the surface of the Earth. It contains analysis of navigation messages and a manner of processing of navigation signals in GPS receivers. Realization of an emulator of the navigation signal of GPS system in Matlab is also described. The purpose of this emulator is a generation of navigation messages, which could be transmitted by universal software radio. The last part of thesis contains the analysis of these signals, which were captured by second software radio.
|
|
|
HF band power amplifier
Korvas, Miroslav ; Zamazal, Michal (referee) ; Šrámek, Petr (advisor)
The theme of my diploma thesis is a realization of the high frequency amplifier with possibility to change its class between class A, B and C with output low pass and band pass filters. The output power is supposed to be at about 10 W in frequency range 3,5 MHz to 14 MHz. The thesis contains theory of amplifier respectively transceiver and filters. In next parts I will design, simulate, realize and measure created amplifier and filters.
|
guest ::
RSS feed.