|
|
Wood log splitter
Trčka, Viktor ; Novák, Tomáš (referee) ; Škopán, Miroslav (advisor)
The scope of the bachelor's thesis is to design a wood log splitter for domestic use up to a maximum diameter of the split log of 400 mm and a maximum length of 1100 mm, so that the splitting power achieves at least 120 kN. Furthermore, to create a critical research for similar splitters, to design a concept according to the specified parameters and to do the functional calculation of the splitter´s equipment and to design particular components of the splitter. Evaluation of Strength and other calculations of the main components. Equipment assembly drawing documentation and welding subassembly of the frame.
|
|
|
Lifting equipment for handling the repair
Bednář, Vojtěch ; Zeizinger, Lukáš (referee) ; Škopán, Miroslav (advisor)
The bachelor's thesis is focused on lifting equipment that are used in smaller repair shops and services. In the first theoretical part, a survey of currently used and industrially produced workshop lifting equipment is carried out. In the second part, the design of the workshop gantry crane verified by functional and dimensional calculations is described, and finally the structural solution supplemented by the drawing documentation of the crane.
|
|
|
Mechanical screens for a small hydropower plant
Lesák, Martin ; Zeizinger, Lukáš (referee) ; Škopán, Miroslav (advisor)
In the introductory part of this bachelor thesis is performed a critical search of wiper mechanisms used to clean the screens of a small hydroelectric power plant. The work also contains a substantiated concept of the proposed solution, strength calculations of important structural elements and drawing documentation of selected components.
|
|
|
Wood-splitting machine
Svoboda, Vít ; Škopán, Miroslav (referee) ; Malášek, Jiří (advisor)
The objectives of the bachelor’s thesis is to make a short research about the cutting machines in general, compare the design, individual drives and the parameters of these machines. The next part is the emphasis on the actual construction of the machine, which is another goal of the work. At first, the frame is designed, then the hydraulic circuit of machine is designed by calculating and the last part deals with control and supporting calculations splitter component elements. The basic drawings of selected components of the splitting machine are parts of the work.
|
|
| |
|
| |
|
|
Dental compressor
Sluková, Lenka ; Malášek, Jiří (referee) ; Škopán, Miroslav (advisor)
Bachelor thesis deals with design specification draft dual cylinder oil-free compressor with membrane dryer for dental use. The first part of this thesis deals with the description of the literature search and critical functionality similar devices. The second part contains calculations of the major dimensions and design of compressor which is supplemented with drawings in. In conclusion renders the design and the total solution of the compression unit and the arrangement of the individual components.
|
|
|
Conveyor Inverter - Design Lifting Mechanism
Zálešák, Martin ; Kašpárek, Jaroslav (referee) ; Škopán, Miroslav (advisor)
I am concern with a proposal of conceptual solution of Conveyor Inverter in my bachelor work. This Conveyor Inverter is used for the change of the direction europallet about 90° between roller and chain conveyor according to given technical parameters. My bachelor work contains complete 3D proposal, constructional and functional solutions which are based on checking calculations. Lifting of the Conveyor Inverter is done using a leverage mechanism of electric motor.
|
|
|
Lift trucks
Janda, Jiří ; Pokorný, Přemysl (referee) ; Škopán, Miroslav (advisor)
The aim of this thesis is a comprehensive comparison of forklifts, which are available on the Czech market. In each chapter discusses the general criteria for the assessment of industrial trucks, such as driving and lifting mechanism. The work includes the possibility of energy recovery.
|
|
| |
guest ::
