Original title:
Povrchová úprava rezonančních desek strunných hudebních nástrojů
Authors:
Skřivánková, Nicole Document type: Master’s theses
Year:
2021
Language:
cze Abstract:
[cze][eng] Diplomová práce je zaměřená na porovnání vhodnosti povrchových úprav rezonančních desek. Vybrány byly rezonanční výřezy druhé jakosti určené pro učňovské nástroje. Rezonanční desky byly vybrány na základě dostupnosti nejčastěji využívaných tuzemských dřevin. Pro výrobu učňovských nástrojů, a to zejména strunných nástrojů se využívá rezonančního dřeva smrku (picea abies), olše (alnus glutinosa) a javoru (acer saccharum, acer pseudoplatanus). Rezonanční desky byly připraveny v radiálním a tangenciálním směru pro javor, radiálním směru v případě smrku a olše. Pro porovnání vhodnosti nátěrových hmot byly vybrány šelaková politura a akryluretanový lak. Pro ověření kvalitativních, vzhledových, chemických a akustických vlastností zkušebních rezonančních desek byla vytvořena metodika zkoušek. Vlastnosti zkušebních vzorků byly vyhodnocené na základě naměřených údajů a vybraných platných norem určených pro danou tématiku. Z výsledků mechanických a chemických zkoušek vyplynula velmi dobrá houževnatost povrchu opatřeného akryluretanovým lakem, zatímco šelaková politura měla v tomto ohledu zjevné nedostatky. Akryluretanový lak byl také mnohem odolnější vůči zmatnění povrchu poškrábáním a způsoboval menší změnu barvy na dřevě. Z hlediska akustických vlastností byla schopnost šíření mechanických vln skrz rezonanční desky velmi podobná pro obě nátěrové hmoty, ale šelaková politura dosahovala lepší schopnosti převodu vibrací ve dřevě na zvukové vlny do okolí.The diploma thesis is focused on the comparison of the suitability of surface treatments of resonant plates. Resonant cutouts of the second quality intended for apprentice instruments were selected. The soundboards were selected on the basis of the availability of the most frequently used domestic woody plants. Apprenticeship instruments, especially stringed instruments are used resonant wood of spruce (picea abies), alder (alnus glutinosa) and maple (acer saccharum, acer pseudoplatanus). Resonance plates were prepared in radial and a tangential direction for maple, a radial direction for spruce and alder. To compare the suitability of paints, polish and acrylicurethane varnish were selected. A test methodology was developed to verify the qualitative, visual, chemical and acoustic properties of test resonance plates. The properties of the test specimens were evaluated on the basis of measured data and selected valid standards intended for the given topic. The results of the echanical and chemical tests showed a very good toughness of the surface provided with the acrylicurethane varnish, while the shellac polish had obvious shortcomings in this respect. Acrylicurethane varnish was also much more resistant to scratching the surface and caused less discoloration on the wood. In terms of acoustic properties, the ability to propagate mechanical waves through resonant plates was very similar for both paints, but the shellac polish achieved a better ability to transfer vibrations in the wood to sound waves to the surroundings.
Keywords:
acoustic properties; acrylicurethane paint; akryluretanové nátěrové hmoty; akustické vlastnosti dřeva; nátěrové hmoty; paints; physical and mechanical properties; resonant boards; resonant cut-outs; rezonanční desky; rezonanční výřezy; shellac polish; šelaková politura