Original title:
Výroba řetězového kola motocyklu
Translated title:
Manufacturing of Motorcycle Sprocket
Authors:
Hrazdíra, Michal ; Podaný, Kamil (referee) ; Řiháček, Jan (advisor) Document type: Master’s theses
Year:
2024
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta strojního inženýrství Abstract:
[cze][eng]
Práce je zaměřena na výrobu řetězového kola motocyklu, které slouží k přenosu kroutícího momentu z výstupní hřídele převodovky na zadní disk kola. Pro výrobu řešeného dílce byla zvolena ocel 12 050, která je pro tento účel vhodná. Řetězové kolo, vyráběné v sérii 80 000 ks/rok, má průměr 191,9 mm a tloušťku 5 mm. Po zvážení všech stupních faktorů byla pro výrobu zvolena metoda přesného stříhání s nátlačnou hranou. Pro danou sérii byl vybrán polotovar ve formě svitku, který má vnější průměr 1 400 mm a šířku 204 mm. Pro roční výrobní dávku bude potřeba 59 celých a jeden neúplný svitek. Před samotným návrhem nástroje byla provedena technologičnost a kontrolní výpočty, jež ověřily funkčnost navrhovaného střihadla. Nástroj byl doplněn o technickou dokumentaci a podrobný popis konstrukce. Na základě vypočítaných hodnot byl navržen trojčinný hydraulický lis Feintool HFA 11 000 plus. Ten je součástí výrobní linky, ve které se také nachází odvíjecí a rovnací zařízení.
The work focuses on the production of a motorcycle sprocket, which transfers the torque from the output shaft of the gearbox to the rear disk of the wheel. Steel 12 050 was chosen for the production of the component, which is suitable for the intended purpose. The sprocket, produced in a series of 80,000 pieces per year, has a diameter of 191.9 mm and a thickness of 5 mm. After considering all factors, fine blanking with v-ring was selected as the manufacturing method. For this series, a semi-finished product in the form of a coil was chosen, which has an outer diameter of 1,400 mm and a width of 204 mm. For the annual production batch, 59 full coils and one incomplete coil will be required. Before the actual tool design, technological and control calculations were performed to verify the functionality of the proposed cutter. The tool was supplemented with technical documentation and a detailed description of the construction. Based on the calculated values, a triple-action hydraulic press Feintool HFA 11,000 plus was designed, which is part of the production line, which also includes decoiling and straightening equipment.
Keywords:
fine blanking; motorcycle sprocket; steel 12 050; v-ring; nátlačná hrana; ocel 12 050; přesné stříhání; řetězové kolo
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: https://hdl.handle.net/11012/247258