Original title:
Tepelný výměník využívající strukturovaný materiál
Translated title:
Heat exchanger using structured material
Authors:
Simon, Jakub ; Čížek, Petr (referee) ; Vaverka, Ondřej (advisor) Document type: Master’s theses
Year:
2024
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta strojního inženýrství Abstract:
[cze][eng]
Cílem této práce bylo vyvinout a popsat metodu návrhu tepelného výměníku využívajícího Triply Periodic Minimal Surfaces (TPMS) struktury a ověřit ji návrhem, výrobou a experimentálním otestováním funkčního vzorku. Jedná se o chladič typu olej-voda vyrobený aditivně technologií Laser Powder Bed Fusion na stroji SLM 280 HL z materiálu AlSi10Mg. Po sérii analýz a testů byla pro vyvíjenou metodu zvolena kubická diamond struktura s minimální tloušťkou stěny 0,7 mm a rozsahem relativních hustot 15 až 25 % (délka hrany buňky 11,1÷18,5 mm). Součástí metody je také predikční skript výkonu a dalších parametrů navrhovaného výměníku, který byl vytvořen z dat naměřených během testování vzorků s různými konfiguracemi buněk. Samotná metoda vede uživatele krok za krokem od volby vstupních požadavků, přes odhad výkonu, až po dvoufázové parametrické modelování samotného TPMS výměníku (explicitní a implicitní). Funkční vzorek, vytvořený pomocí této metody, dosáhl tepelného výkonu 315,25 W, což je o 4,2 % více než u referenčního deskového výměníku. TPMS výměník také disponoval o 78 % menším teplosměnným tělesem a o 62 % nižší celkovou hmotností. Rozdíly mezi predikovaným a reálným tepelným výkonem činily až 18 %. Metoda je v současném stavu vhodná pro návrh TPMS výměníků s výkony 50 až 230 W. Obecně je však univerzální a lze s ní zmapovat i oblasti vyšších výkonů, čímž se sama zpřesní.
The aim of this work was to develop and describe a design method of a heat exchanger using Triply Periodic Minimal Surfaces (TPMS) structures and to validate it by design, fabrication, and experimental testing of a working sample. It is an oil-water cooler fabricated additively by Laser Powder Bed Fusion on an SLM 280 HL machine from AlSi10Mg material. After a series of analyses and tests, a cubic diamond structure with a minimum wall thickness of 0.7 mm and a range of relative densities of 15 to 25 % (cell edge length 11.1÷18.5 mm) was chosen for the developed method. The method also includes a prediction script of the performance of the proposed heat exchanger, which was created from data measured during testing of samples with different cells configurations. The method itself guides the user step-by-step from the selection of input requirements, through the estimation of performance, to the two-step parametric modelling of the TPMS exchanger itself (explicit and implicit). The functional sample created using this method achieved heat flows of 315,25 W, which is 4.2 % higher than the reference plate exchanger. The TPMS exchanger also has a 78 % smaller heat transfer body and 62 % less total mass. The differences between predicted and actual heat flows were up to 18%. In its current state, the method is suitable for the design of TPMS heat exchangers with heat flow of 50 to 230 W. However, it is generally versatile and can also be used to map other areas, thus making it more accurate.
Keywords:
design method; diamond; Heat exchanger; TPMS structures; water-oil cooler; chladič olej-voda; diamond; metoda návrhu; tepelný výměník; TPMS struktury
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: https://hdl.handle.net/11012/247293