Original title:
Laserové řezání lehkých a barevných kovů
Translated title:
Laser cutting of light and non-ferrous metals
Authors:
Krucina, Mikuláš ; Kalivoda, Milan (referee) ; Osička, Karel (advisor) Document type: Master’s theses
Year:
2024
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta strojního inženýrství Abstract:
[cze][eng]
Problematika, které se věnuje tato diplomová práce je řezání lehkých a barevných kovů pomocí laseru. Diplomová práce je rozdělena na rešeršní a experimentální část. Rešeršní část se zaměřovala na rozbor fyzikálního principu řezání laserem, technologické možnosti řezání laserem a omezení pro jednotlivé materiály. Experimentální část byla zaměřena na sledování vlivu rychlosti řezání, tlaku použitého plynu a výkonu stroje v závislosti na drsnosti povrchu a rozměrové přesnosti vyrobených vzorků. Pro experiment byly zvoleny dva materiály. V případě všech vzorků byl pro dělení použit vláknový laser DURMA HD-F 3015BH. V první části experimentu byl sledován vliv vybraných parametrů laserového řezání u vzorků vyrobených z materiálu EN AW 5754 o tloušťce 3 mm. V druhé části experimentu byl použit materiál Cu ETP o tloušťce 1 mm a také v tomto případě byl pozorován vliv vybraných parametrů laserového řezání. Poslední část této diplomové práce se zaobírá zhodnocením procesu řezání z pohledu ekonomiky, kde byl proveden výpočet ceny za metr řezu a hodinové sazby laseru pro daný materiál.
The problem dealt with in this thesis is laser cutting of light and non-ferrous metals. The thesis is divided into research and experimental parts. The research part focused on the analysis of the physical principle of laser cutting, technological possibilities of laser cutting and limitations for individual materials. The experimental part was focused on monitoring the effect of cutting speed, gas pressure and machine power on the surface roughness and dimensional accuracy of the fabricated samples. Two materials were chosen for the experiment. For all samples, a DURMA HD-F 3015BH fibre laser was used for cutting. In the first part of the experiment the influence of selected laser cutting parameters was investigated for samples made of EN AW 5754 material with a thickness of 3 mm. In the second part of the experiment, Cu-ETP material with a thickness of 1 mm was used and the influence of the selected laser cutting parameters was also observed in this case. The last part of this thesis deals with the evaluation of the cutting process from an economical point of view, where the price per meter of cutting and the hourly laser rate for the material were calculated.
Keywords:
fibre laser; laser; laser cutting; light metals; non-ferrous metals; barevné kovy; laser; lehké kovy; vláknový laser; řezání laserem
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: https://hdl.handle.net/11012/249077