Original title:
Vliv rychlosti ochlazování na mikrostrukturu odlitku zhotoveného metodou přesného lití na vytavitelný model
Translated title:
The Influence of Cooling Rate on the Microstructure of Casting Produced by Investment Casting
Authors:
Vybíral, Ondřej ; Kaňa, Václav (referee) ; Nekuda, Pavel (advisor) Document type: Bachelor's theses
Year:
2024
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta strojního inženýrství Abstract:
[cze][eng]
Předložená práce poskytuje náhled do problematiky přesného lití a metalurgie slitin hliníku, se zaměřením na siluminy a jejich krystalizaci. V experimentální části byly touto technologií zhotoveny tři zkušební odlitky ze slitiny AlSi7Mg s kombinací různých průřezů, které byly po odlití ochlazovány různou rychlostí. Pro hodnocení vlivu rychlosti ochlazování na mikrostrukturu byla použita DAS analýza. Rovněž byl zkoumán vliv průřezu zkušebních vzorků a místa jejich odběru. Měření prokázalo, že hodnoty DAS jsou nižší u odlitků s vyšší rychlostí ochlazování a menším průřezem. Současně byly naměřeny vyšší hodnoty u vzorků odebraných v blízkosti tepelných uzlů.
The presented work provides an insight into the theme of investment casting method and the metallurgy of aluminum alloys, focusing on silumins and their crystallization. In the experimental part, three test castings were made from the AlSi7Mg alloy using this method, with combination of various cross-sections and different cooling rates. SDAS analysis was used to evaluate the influence of cooling rate on the microstructure. The measured values were examined for their dependencies on the cooling rate, casting cross-section, and different sampling locations. The measurements demonstrated that SDAS value is lower in castings with higher cooling rates and smaller cross-sections. At the same time, higher value was measured in samples taken near thermal nodes.
Keywords:
AlSi7Mg; cooling rate; investment casting; SDAS measurements; AlSi7Mg; DAS analýza; přesné lití; rychlost ochlazování
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: https://hdl.handle.net/11012/247092