guest ::
| Home > Academic theses (ETDs) > Master’s theses > Kalibrace měřícího zařízení aerodynamického tunelu VUT |
Original title:
Kalibrace měřícího zařízení aerodynamického tunelu VUT
Translated title: Wind tunnel measuring equipment calibration
Authors: de Boer, Hendrik ; Grim, Robert (referee) ; Matějů, Jiří (advisor)
Document type: Master’s theses
Year: 2021
Language: eng
Publisher: Vysoké učení technické v Brně. Fakulta strojního inženýrství
Abstract: [eng] [cze]
Keywords: aerodynamika; Kalibrace přístrojů; Kalibrace testovacích sekcí; měření bdění; Větrný tunel; In this thesis the topic of calibration of devices and sections has been investigated in relation to the wind tunnel at the Brno Institute of Aerospace Engineering. The instruments used in the wind tunnel are calibrated and section calibrations on the test section are described and performed. Calibration sheets and report templates are made to simplify future processes. The newly calibrated set-up is used to perform force and wake measurements on a model car; which are compared to measurements pre-calibration to further exemplify the usefulness of calibrations.
Institution: Brno University of Technology (web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library.
Original record: http://hdl.handle.net/11012/201505
Permalink: http://www.nusl.cz/ntk/nusl-588315
The record appears in these collections:
Universities and colleges > Public universities > Brno University of Technology
Academic theses (ETDs) > Master’s theses
Translated title: Wind tunnel measuring equipment calibration
Authors: de Boer, Hendrik ; Grim, Robert (referee) ; Matějů, Jiří (advisor)
Document type: Master’s theses
Year: 2021
Language: eng
Publisher: Vysoké učení technické v Brně. Fakulta strojního inženýrství
Abstract: [eng] [cze]
Keywords: aerodynamika; Kalibrace přístrojů; Kalibrace testovacích sekcí; měření bdění; Větrný tunel; In this thesis the topic of calibration of devices and sections has been investigated in relation to the wind tunnel at the Brno Institute of Aerospace Engineering. The instruments used in the wind tunnel are calibrated and section calibrations on the test section are described and performed. Calibration sheets and report templates are made to simplify future processes. The newly calibrated set-up is used to perform force and wake measurements on a model car; which are compared to measurements pre-calibration to further exemplify the usefulness of calibrations.
Institution: Brno University of Technology (web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library.
Original record: http://hdl.handle.net/11012/201505
Permalink: http://www.nusl.cz/ntk/nusl-588315
The record appears in these collections:
Universities and colleges > Public universities > Brno University of Technology
Academic theses (ETDs) > Master’s theses
Record created 2024-04-02, last modified 2024-04-03