Original title:
Vývoj absorbéru rázové energie s využitím kovového 3D tisku
Translated title:
Development of the Impact Energy Absorber Made by Metal 3D Printing
Authors:
Kraicinger, Vít ; Malý, Martin (referee) ; Vrána, Radek (advisor) Document type: Bachelor's theses
Year:
2020
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta strojního inženýrství Abstract:
[cze][eng]
V dnešní době se pro absorpci energie využívají především různě profilované díly. Pro speciální případy jsou navržené přesné komponenty, jako je tomu u Formule Student, kde se používá deformační člen se strukturou honeycomb. Tato bakalářská práce je zaměřena na návrh absorbéru nárazové energie vyrobeného pomocí technologie SLM a mikro-prutových struktur. Pro samotný návrh byl vytvořen ucelený přehled současného poznání v oblasti deformačních zón, absorbéru energie a výzkumů zabývajících se absorpcí energie. Na základě rešerše byl vybrán nejvhodnější materiál pro výrobu AlSi10Mg. Následně byl určen vhodný typ mřížky (BCC) a veškeré parametry mikro-prutové struktury. Pro zvolené parametry byly vymodelovány dva absorbéry energie s rozdílným průměrem prutu (0,4 mm a 0,8 mm) a rozdílnou velikostí mřížky (4 mm a 8 mm). V závěru práce jsou dva zjednodušené výpočty, které ukazují předpovídané výsledné hodnoty navrhnutých absorbérů a tuhost vrstev mikro-prutové struktury s proměnnou hustotou.
Today, variously profiled parts are mainly used for energy absorption. For special cases, precise components are designed, as in the case of Formula Student, where a deformation article with a honeycomb structure is used. This bachelor thesis is focused on the design of an impact energy absorber made by SLM technology and lattice structures. For the design itself, a comprehensive overview of current knowledge in the field of deformation zones, energy absorbers and researches dealing with energy absorption was created. Based on the study, the most suitable material to produce AlSi10Mg was selected. Subsequently, the appropriate type of grid (BCC) and all parameters of the lattice structure were determined. Two energy absorbers with different struts diameters (0.4 mm and 0.8 mm) and different grid sizes (4 mm and 8 mm) were modeled for the selected parameters. At the end of the work are two simplified calculations that show the predicted final values of the proposed absorbers and the stiffness of the layers of the lattice structure with graded density.
Keywords:
deformation article; energy absorber; Formula Student; lattice structure; Selective Laser Melting; absorbér energie; deformační člen; Formula Student; mikro-prutová struktura; Selective Laser Melting
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: http://hdl.handle.net/11012/192268