Original title:
Monitorování procesu FDM tisku
Translated title:
Monitoring of FDM printing process
Authors:
Rafaja, Hynek ; Čížek, Petr (referee) ; Zatočilová, Aneta (advisor) Document type: Master’s theses
Year:
2019
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta strojního inženýrství Abstract:
[cze][eng]
Cílem této práce je vývoj monitorovacího systému pro 3D tisk metodou Fused Deposition Modeling, který bude schopný identifikovat chybové stavy vzniklé při tisku. Při řešení byly identifikovány potřebné chybové stavy. Poté došlo k naprogramování algoritmu, který pomocí kritéria identifikuje daný chybový stav. Výsledný Hardware pro monitorování byl implementován do tiskárny a experimentálně ověřen. Byl vytvořen systém, který dokáže identifikovat chybové stavy s přesností 94,7 %. Hlavním přínosem této práce je automatická identifikace chybových stavů, která v případě nutnosti zastaví tisk. To vede ke zmenšení zmetkovitosti a šetření výrobních nákladů. Do budoucna by software mohl při identifikaci chybového stavu automaticky upravit parametry tisku. Tím by došlo k zamezení nebo úplnému odstranění chybového stavu bez zásahu uživatele.
The target of this work is the development of a monitoring system for 3D printing by the Fused Deposition Modeling method, which will be able to identify printing error conditions. During the solving process the needed error conditions were identified. Then, an algorithm was programmed to identify the error condition using the criterion. The resulting Monitoring Hardware was implemented in the printer and experimentally verified. A system has been developed that can identify error conditions with an accuracy of 94.7%. The main benefit of this work is the automatic identification of error conditions that stop printing if necessary. This leads to a reduction in scrap and cost savings. In the future, the software could automatically adjust the print parameters when identifying an error condition. This would prevent or completely eliminate the error condition without user intervention.
Keywords:
3D print; Additive manufacturing; FDM; online monitoring; 3D tisk; Aditivní technologie; FDM; online monitorování
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: http://hdl.handle.net/11012/179016