Original title:
Vliv parametrů stereolitografického 3D tisku na dobu tisku
Translated title:
The influence of the parameters of stereolithographic 3D printing on the printing time
Authors:
Kůst, Martin ; Škaroupka, David (referee) ; Zatočilová, Aneta (advisor) Document type: Bachelor's theses
Year:
2017
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta strojního inženýrství Abstract:
[cze][eng]
Tato práce se zabývá stereolitografickým 3D tiskem (SLA). Popisuje konstrukci jak s horním, tak spodním osvitem a uvádí rozdíly mezi osvitem laserem a DLP (Digital Light Processing) projektorem. Další částí je nalezení závislosti mezi dobou osvitu a vytvrzenou tloušťkou vrstvy neboli materiálového profilu u materiálu DETAX šedý, tak aby bylo možné s tímto materiálem pracovat a provádět další experimenty. Tyto experimenty jsou prováděny na SLA tiskárně SolFlex650 společnosti Way2production. Pro snazší práci s touto tiskárnou byly identifikovány parametry ovlivňující dobu tisku a následně nalezen model, na jehož základě je možné celkový čas tisku spočítat.
This paper deals with stereolithographic 3D printing (SLA). It describes both upper and lower lighting design and shows the differences between laser light and DLP (Digital Light Processing) projector. Another part is to find the dependence between the time of exposure and the thickness of the layer also known as material profile on the DETAX, gray. So another work and further experiments can be done using this material. These experiments are performed on Way2production's SolFlex650 SLA printer. For ease of use with this printer, parameters affecting print time have been identified and a model is then found to calculate the total print time.
Keywords:
Additive technology; material profile; print duration; print speed; printer parameters; SLA; stereolithography; Aditivní technologie; délka trvání tisku; materiálový profil; parametry tiskárny; rychlost tisku; SLA; stereolitografie
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: http://hdl.handle.net/11012/66302