Original title:
Svařování žárově pozinkovaných plechů pomocí hybridní technologie Laser-TIG
Translated title:
Welding of hot-dip galvanized sheets using hybrid Laser-TIG technology
Authors:
Bukvic, Tomáš ; Sigmund, Marian (referee) ; Mrňa, Libor (advisor) Document type: Master’s theses
Year:
2021
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta strojního inženýrství Abstract:
[cze][eng]
Práce se zabývá ověřením vhodnosti metody Laser-TIG pro průvarové svařování pozinkovaných plechů z ocelí WSS M1A 365-A14 50G a DC01. Elektrický oblouk zde funguje jako předehřev pro odpaření zinkové vrstvy. Jako proměnný parametr byla zvolena velikost proudu TIG zdroje 0, 20, 30 a 40 A. Byly zhotoveny zkušební sváry, které byly podrobeny tahové zkoušce a metalografickému vyhodnocení pro ověření kvality spoje a jeho mechanických vlastností. Pro galvanicky pozinkovanou ocel WSS M1A 365-A14 50G byl zaznamenán pozitivní vliv oblouku a podařilo se stanovit optimální svařovací parametry. Elektrický oblouk pozitivně ovlivňoval i svařování žárově pozinkované oceli DC01, avšak při zvolených zkušebních parametrech ne natolik, aby bylo možné zhotovit spolehlivý spoj.
Thesis is focused on verification of suitability of Laser-TIG technology for penetrating welding of galvanized sheets, made of WSS M1A 365-A14 50G steel and DC01 steel. Electric arc functions here as a preheating for evaporation of zink layer. Electric current was chosen as a variable parameter of magnitudes 0, 20, 30 and 40 A. Test welds were made, which have been subjected to a tensile test and metallographic evaluation. The positive influence for electrolytically galvanized steel WSS M1A 365-A14 50G was registered and determination of optimal welding parameters was successful. The electric arc also had a positive effect on welding of hot-dip galvanized steel DC01, but at the selected test parameters not enough to achieve a reliable connection.
Keywords:
DC01; Laser-TIG; welding; WSS M1A 365-A14 50G; zink coating; DC01; Laser-TIG; svařování; WSS M1A 365-A14 50G; zinkové povlakování
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: http://hdl.handle.net/11012/197790