Original title:
Rychlé slinování pokročilých keramických materiálů
Translated title:
Fast sintering of advanced ceramic materials
Authors:
Prajzler, Vladimír ; Salamon, David (referee) ; Maca, Karel (advisor) Document type: Bachelor's theses
Year:
2015
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta strojního inženýrství Abstract:
[cze][eng]
Bakalářská práce se zabývá rychlým slinováním pokročilých keramických materiálů, a to tetragonálního ZrO2 a Al2O3 v konvenční odporové peci. Tento přístup je umožněn speciální superkantalovou pecí schopnou vyvinout rychlosti ohřevu až 200 °C/min. Rychlým slinováním byly získány vzorky s relativní hustotou vyšší než 93 % u ZrO2, resp. 97 % u Al2O3, a to bez vytvoření trhlin v tělesech. Dosažené relativní hustoty v případě tetragonálního ZrO2 byly vyšší u vzorků s většími póry v keramickém polotovaru. Toto chování je odlišné od konvenčního slinování a vede k úvahám o přenosu tepla zejména radiací.
The bachelor thesis is dealing with fast sintering of advanced ceramic materials, such as tetragonal zirconia and alumina in conventional resistance furnace. This approach is made possible by special superkanthal furnace, which is capable to reach a heating rate of 200 °C/min. Samples obtained through fast sintering reached relative density higher than 93% for zirkonia and 97% for alumina, without forming any cracks in samples. Achieved relative density in the case of tetragonal zirconia was higher for samples with larger pores in the green body. This behavior is different of conventional sintering and leads to considerations of heat transfer mainly by radiation.
Keywords:
Al2O3; core-shell structure; fast sintering; tetragonal ZrO2; Al2O3; rychlé slinování; tetragonální ZrO2; „core-shell“ struktura
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: http://hdl.handle.net/11012/40986