Original title:
Experimentální a numerická analýza zesílení železobetonových prvků
Translated title:
Experimental and numerical analysis of reinforced concrete elements
Authors:
Niedoba, Jakub ; Láník, Jaromír (referee) ; Žítt, Petr (advisor) Document type: Master’s theses
Year:
2021
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta stavební Abstract:
[cze][eng]
Diplomová práce řeší chování dodatečně vyztužených betonových dílců. Cílem bylo zhodnotit různé druhy dodatečného vyztužení v porovnání nejen mezi sebou, ale také s referenčním tělesem. V rámci této práce byly vybetonovány tři železobetonové trámy. První sloužil jako referenční těleso, druhý byl dodatečně vyztužen pomocí uhlíkové lamely nalepené na spodní okraj trámu a poslední byl dodatečně předepnut nesoudržnou výztuží. Následně byla všechna tělesa zatěžována čtyřbodovým ohybem. Poté se provedlo vyhodnocení, ze kterého vyplývá, že oba dodatečně vyztužené dílce odolávají zatížení mnohem lépe než referenční těleso. V závěru jsou uvedeny různé druhy využití obou metod a také nevýhody, se kterými je nutné při navrhování počítat.
This master‘s thesis deals with the behaviour of strengthened reinforced concrete beams. The aim was to evaluate different types of strengthening in comparison not only with each other, but also with the reference beam. Three reinforced concrete beams were fabricated for the purpose of the thesis. The first served as a reference beam, the second was strengthened with carbon lamella glued to the lower edge of the reinforced concrete beam, and the last one was strengthened with unbonded post-tensioning system. Subsequently, they were all loaded by a four-point bending. An evaluation was then carried out which shows that the two strengthened reinforced concreate beams resist the load much better than the reference beam. In the conclusion, different utilization possibilities of both methods are listed, as well as the disadvantages that must be taken into account when designing.
Keywords:
CFRP; composite reinforcement; load test; numerical analysis; post tension; strengthening; unbonded post-tensioning system.; CFRP; dodatečné předepnutí; dodatečné vyztužení; dodatečný předpínací systém bez soudržnosti.; kompozitní výztuž; numerická analýza; Zatěžovací zkouška
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: http://hdl.handle.net/11012/196211