Original title:
Výroba spony
Translated title:
Manufacturing of clip
Authors:
Melezinek, František ; Harant, Martin (referee) ; Podaný, Kamil (advisor) Document type: Bachelor's theses
Year:
2020
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta strojního inženýrství Abstract:
[cze][eng]
Práce se zabývá technologií výroby spony, která je spojujícím segmentem „clip“ rámečku. Výlisek je vyroben z plechu o tloušťce 0,3 mm a obsahuje řadu ohybů a tvarových střihů. Na základě rozboru vhodných výrobních metod a se zohledněním velikosti série 300 000 ks za rok byla jako nejvhodnější zvolena technologie sdruženého postupového nástroje. Výroba probíhá v osmi krocích kombinujících střih a ohyb. Jako polotovar byl zvolen svitek o šířce 53,4 mm z pružinové nízkolegované oceli 51CrV4. Dle stanovené síly 43 kN a práce 15 kJ bude díl vyráběn na univerzálním hydraulickém lisu CUPS 6,3 DEU od firmy HŠV stroje a.s.
The thesis deals with technology of clip manufacture, used as connecting segment of clip frame. The molding is made out of 0,3 mm metal sheet and includes a number of bends and shaped cuts. Based on analysis of suitable production metods and size of series of 300 000 pieces per year, progressive combined tool was chosen as the best option. The part will be made in eight steps combining cutting and bending. For semi-finished product was used 53,4 mm wide roll of sheet metal. As material was choosen spring low alloy steel 51CrV4. Based on calculated force 43kN and work 15kJ the part will be produced on universal hydraulic press CUPS 6,3 DEU manufactured by HŠV stroje a.s.
Keywords:
3 DEU; bending; cutting; press CUPS 6; progressive combined tool; steel 51CrV4; 3 DEU; lis CUPS 6; ocel 51CrV4; ohyb; postupový sdružený nástroj; Střih
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: http://hdl.handle.net/11012/192150