Original title:
Studium vlivu složení na mechanické vlastnosti vysokohodnotného betonu
Translated title:
Study of the influence of compositon on the mechanical properties of high performance concrete
Authors:
Veleba, Ondřej ; Šoukal, František (referee) ; Krátký, Josef (advisor) Document type: Master’s theses
Year:
2008
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta chemická Abstract:
[cze][eng]
Tato práce se zabývá studiem vlivu složení na mechanické vlastnosti vysokohodnotných betonů na bázi portlandského cementu. Bylo připraveno 29 záměsí vysokohodnotných betonů s proměnlivým složením jednotlivých komponent. Mezi zvolené komponenty patřily tyto: cement Aalborg White (52,5 N), mikrosilika, jemně mletá granulovaná vysokopecní struska, velmi jemně mletý křemen, kalcinovaný bauxit a superplastifikátor na bázi polykarboxylátů. Na připravených vzorcích byl sledován vývoj mechanických parametrů (pevnost v tlaku a v tahu za ohybu) a to po 7 a 28 dnech vlhkého uložení. Dosažené pevnosti v tlaku po 28 dnech se pohybovaly v rozmezí hodnot od 92 do 194 MPa, zatímco pevnosti v tahu za ohybu v rozmezí hodnot od 7 do 23 MPa (bez aplikace vláknité výztuže). Na závěr byly sestrojeny a vyhodnoceny grafy závislostí mechanických parametrů na obsahu jednotlivých složek v záměsích.
This work is devoted to study the influence of the composition on mechanical properties of high performance concret based on portland cement. 29 samples of high performance concrete (HPC) warying in composition were prepared. The constituents used for HPC preparation were: cement Aalborg White, silica fume, finelly ground blast furnace slag, finelly ground silica, calcinated bauxite and polycarboxylate based superplasticizer. The mechanical parameters (flexural and compressive strength) of the samples were observed after 7 and 28 days of moist curing. Compressive strength values after 28 days were in the range of 92 to 194 MPa and the flexural strength values were in the range of 7 to 23 MPa (without using of fiber reinforcement). The graphs showing mechanical parameters depending on the mixture composition were constructed and consequently evaluated.
Keywords:
aggregates; analysis of variance (ANOVA); blast furnace slag; calcinated bauxite; design of experiments (DOE).; High Performance Concrete (HPC); high-strength concrete (HSC); hydration; Portland cement; silica fume (SF); superplasticizers (SP); analýza rozptylu (ANOVA); hydratace; kalcinovaný bauxit; kamenivo; křemičité úlety (SF); plánovaný návrh experimentů (DOE).; portlandský cement; superplastifikátory (SP); Vysokohodnotný beton (HPC); vysokopecní struska; vysokopevnostní beton (HSC)
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: http://hdl.handle.net/11012/13572