Original title:
Využití hybridní technologie Laser-TIG pro svařování rozdílných materiálů používáných v energetice
Translated title:
Use of laser-TIG hybrid technology for welding of different materials used in power engineering
Authors:
Žák, Tomáš ; Beran, David (referee) ; Mrňa, Libor (advisor) Document type: Master’s theses
Year:
2019
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta strojního inženýrství Abstract:
[cze][eng]
Práce se zabývá analýzou vlivu procesních parametrů předehřevu pomocí elektrického oblouku z TIG hořáku během laserového svařování na vlastnosti svaru korozivzdorné martenzitické oceli a uhlíkové oceli s vyšší pevností. V této práci byl zhotoven experiment, při němž se svařily plechy o tloušťce 3 mm z ocelí X12Cr13 a S355. Svařovalo se postupně laserem, pak laserem s TIG předehřevem a naposled laserem s předehřátím materiálu indukčním ohřevem. Při využití TIG předehřevu se měnil svařovací proud nastavený na zdroji. Zhotovené svary se následně vyhodnotily na základě makrostruktury, mikrostruktury a zkoušce tvrdosti podle Vickerse.
Thesis is focused on analyzing the influence of preheating process parameters using electric arc from TIG torch during laser welding on weld properties of stainless steel and carbon steel with higher strength. In this thesis experiment was done in which metal sheets 3 mm thick from X12Cr13 and S355 steels were welded. Welding was done first with using only laser, then laser with TIG preheating and lastly laser with preheated material by induction heater. When TIG preheating was used than set welding current was changed on the power source. The welds were subsequently evaluated based on macrostructure, microstructure and Vickers hardness test.
Keywords:
laser welding; Laser-TIG; preheating; S355; TIG; X12Cr13; Laser-TIG; laserové svařování; předehřev; S355; TIG; X12Cr13
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: http://hdl.handle.net/11012/179412