Original title:
Studie protipovodňových opatření v lokalitě Kroměříž
Translated title:
Study of flood protection measures in the Kroměříž locality
Authors:
Skokan, Jiří ; Golík, Pavel (referee) ; Dráb, Aleš (advisor) Document type: Master’s theses
Year:
2024
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta stavební Abstract:
[cze][eng]
Diplomová práce se zabývá návrhem a hydraulickým posouzením suché nádrže na tocích Kotojedka (IDVT 10202906) a Vážanský potok (IDVT 10189772) v lokalitě Kroměříž. S využitím hydraulických analytických výpočtů byly provedeny základní návrhy parametrů hráze a sdruženého objektu suché nádrže. V softwaru HEC-RAS byl autorem sestaven 1D hydrodynamický model, kterým bylo posouzeno proudění objektem. Při 1D analýze se vy-skytly nejistoty, jako je vznik a vývoj vodního skoku, vliv zatopení přepadového paprsku a spodní výpusti, kapacita spodní výpusti, kapacita spadiště a průběh hladiny ve spadišti a skluzu. Dá se předpokládat, že vzhledem k nižší významnosti navrhovaného vodního díla nebude proveden výzkum na fyzikálním modelu. V úvahu tedy přichází hydraulická analýza 3D numerickým softwarem, který může v tomto případě přinést výsledky pro hydraulické posouzení, či optimalizaci navržených parametrů objektu. S využitím 3D hydrodynamického modelu Flow – 3D byly provedeny hydraulické výpočty proudění vody sdruženým objektem a výsledky srovnány s hodnotami stanovenými 1D modelem a analytickými výpočty. Výsledky budou srovnány ve vybraných profilech sdruženého objektu suché nádrže a v transformačním účinku nádrže.
The diploma thesis deals with the design and hydraulic assessment of a dry retention reser-voir on the Kotojedka (IDVT 10202906) and Vážanský potok (IDVT 10189772) streams in Kroměříž. The basic designs of the dam parameters and the associated dry retention re-servoir flow control structure were carried out using hydraulic analytical calculations. A 1D hydrodynamic model was built by the author in the HEC-RAS software to assess the flow through this object. In the 1D analysis, some uncertainties could not be resolved, such as the formation and evolution of the hydraulic jump, the effect of the safety spillway and bottom outlet submergence, the capacity of the bottom outlet, the capacity of the apron and the water surface elevation in the apron. It can be assumed that, due to the lower significance of the proposed reservoir, it will not be subjected to research on the phy-sical model. Therefore, a hydraulic analysis with 3D numerical software comes into conside-ration, which in this case can provide results for the hydraulic design or optimisation of the desig-ned object parameters. Using the Flow - 3D hydrodynamic model, hydraulic calculations of water flow through the flow control object were performed. The results were compared with the values determined by the 1D model and analytical calculations. The results were compared in the selected profiles of the dry retention reservoir’s flow control object and the transformation effect of the reservoir.
Keywords:
1D model; 3D model; Dry retention reservoir; flow control object; rating curve; 1D model; 3D model; funkční objekt; měrná křivka; Suchá nádrž
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: https://hdl.handle.net/11012/244861