Original title:
Testování funkce synchro-check vývodové ochrany
Translated title:
Testing of Synchro-check Function of Feeder Protection Terminal
Authors:
Cekl, Jakub ; Wasserbauer, Vojtěch (referee) ; Orságová, Jaroslava (advisor) Document type: Bachelor's theses
Year:
2016
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií Abstract:
[cze][eng]
Práce se věnuje testování automatického fázování za pomoci terminálu točivého stroje REM 545 firmy ABB a jeho funkce synchro-check zkušebním přístrojem CMC 256+ firmy OMICRON, kterým jsou simulovány parametry sítě a alternátoru. Nejprve jsou nastíněny základní principy fázování a jejich podmínky. V následujících kapitolách je popsáno vytvoření konfigurace, příprava testovacího přístroje a provedení testu. Závěrem je vytvořen návrh testu v reálném provozu.
This thesis is oriented on testing of automatic synchronizing with the help of the machine terminal REM 545 by ABB and its synchro-check function by CMC 256+ tester by OMICRON, where network and alternator parameters are simulated. Basic principles of phasing and phasing conditions are briefly mentioned. Creation of configuration, tester preparing and test execution are described in following chapters. Test of real use is suggested at the end.
Keywords:
CMC 256+; machine terminal; REM 545; synchro-check; synchronizer; CMC 256+; REM 545; synchro-check; synchronizer; terminál točivého stroje
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: http://hdl.handle.net/11012/60506