Original title:
Svařování žárupevných ocelí metodou APT
Translated title:
Welding of heat resisting steels by SMAW
Authors:
Žemlová, Markéta ; Kubíček, Jaroslav (referee) ; Daněk, Ladislav (advisor) Document type: Bachelor's theses
Year:
2014
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta strojního inženýrství Abstract:
[cze][eng]
Bakalářská práce se zabývá problematikou žárupevných ocelí. Následně rozebírá metodu automatického svařování pod tavidlem a teplotní vlivy během svařování. V praktické části se řeší návar z oceli 26NiCrMo14 – 5, který je navařen s předehřevem elektrickým obloukem pod tavidlem OP 121 TTW drátem TOPCORE 745 B. Následně je návar porovnán s návarem bez předehřevu.
The bachelor thesis deals with heat resistant steels. Then analyzes the method of automatic submerged arc welding and thermal impacts during welding. In the practical part solves weld overlay of steel 26NiCrMo14 - 5, which is welded with preheating arc under flux OP 121 TTW wire TOPCORE 745 B. Then the weld deposit compared with no preheating weld.
Keywords:
flux OP 121 TTW; steel 26NiCrMo14 – 5; strengthening mechanisms; welding parameters; wire TOPCORE 745 B; drát TOPCORE 745 B; mechanizmy zpevnění; ocel 26NiCrMo14 – 5; svařovací parametry; tavidlo OP 121 TTW
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: http://hdl.handle.net/11012/32481