Original title:
Analýza deformačně indukovaných změn fázového složení oceli TRIP metodou EBSD
Translated title:
Analysis of Strain - induced Variations of Phase Composition of the TRIP Steel using EBSD Method
Authors:
Pešina, Zbyněk ; Pantělejev, Libor (referee) ; Man, Ondřej (advisor) Document type: Master’s theses
Year:
2008
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta strojního inženýrství Abstract:
[cze][eng]
Diplomová práce pojednává o měření fázového složení oceli TRIP metodou EBSD. Ocel byla dodána ve dvou variantách termomechanického zpracování. Fázové složení oceli bylo sledováno při různých stupních plastické deformace a to v rozsahu 0 až 10,99%. U jedné varianty termomechanického zpracování bylo dosaženo dobré shody s literárními údaji a to jak co se týče změřeného podílu zbytkového austenitu (15,6%), tak i jeho úbytku s deformací (na 8,9% při maximální aplikované deformaci). U vzorků druhé varianty nebylo dosaženo shody ani v jednom z těchto hledisek.
The diploma thesis deals with phase composition measurement of the TRIP steel, using EBSD method. The steel was delivered as thermo-mechanically treated via two different routes. The phase composition of the steel was examined during gradual plastic deformation in the range 0 to10.99%. One route of thermo-mechanical treatment exhibited good agreement with the literature in terms of measured fraction of the retained austenite (15.6%) as well as its decrease during the deformation (to 8.9% at the maximum imposed strain). The samples of the second route did not show any agreement in either of the parameters spoken.
Keywords:
deformation; EBSD; phase composition; retained austenite; TRIP steel; deformace; EBSD; fázové složení; TRIP oceli; zbytkový austenit
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: http://hdl.handle.net/11012/2920