Original title:
Analýza bimetalové spouště
Translated title:
Analysis of a bimetal release
Authors:
Zelenka, Michal ; Augusta, Zbyněk (referee) ; Valenta, Jiří (advisor) Document type: Master’s theses
Year:
2015
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií Abstract:
[cze][eng]
Tato diplomová práce se zabývá tepelnou spouští v elektrických samočinných spínacích přístrojích. První část práce slouží jako podklad pro návrh bimetalového prvku v tepelné nadproudové spoušti spínacího přístroje. Uvádí parametry a výpočtové vztahy nutné k návrhu bimetalu. Práce dále popisuje princip tepelné spouště a možná konstrukční řešení. Hlavní část je věnována analytickému návrhu tepelné spouště v kompaktním jističi pro zadaný typ bimetalu a požadované pracovní charakteristiky a následnému ověření vypracovaného návrhu měřením. Jedná se zejména o měření závislosti průhybu a síly na oteplení. V následující části byl vytvořen numerický model chování bimetalu, na kterém byla provedena simulace průhybu. V závěru práce je provedeno porovnání výsledků získaných z analytického návrhu s výsledky získanými měřením a simulací.
This master‘s thesis deals with the thermal overload trip unit in automatically operated electrical switching devices. The first part of this thesis serves as a basis for a design of thermostatic bimetal element in electrical switching device. The thesis presents important parameters and calculation principles needed for the design of bimetal element. The thesis further describes the operating principle of thermal trip unit and its possible design solutions. The main part is devoted to analytical calculation and measurement of specific thermostatic bimetal type contained in thermal trip unit of molded case circuit breaker. It is measurement of force and deflection, depending on temperature change. In the next part a numerical model of the bimetallic strip was created and its deflection was simulated. The analytical results are compared with the measured and simulated results at the end of the thesis.
Keywords:
Calculation; Measurement; Molded case circuit breaker; Overcurrent trip unit; Simulation; Thermal overload trip unit; Thermostatic Bimetal; Bimetal; Kompaktní jistič; Měření; Nadproudová spoušť; Simulace; Tepelná spoušť; Výpočet
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: http://hdl.handle.net/11012/39115