Original title:
Metody pro úpravu jakosti povrchu komponent vytvořených 3D kovovým tiskem
Translated title:
Methods for surface improvement of components processed using Selective Laser Melting
Authors:
Krontorád, Martin ; Slavíček, Jakub (referee) ; Malý, Martin (advisor) Document type: Bachelor's theses
Year:
2022
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta strojního inženýrství Abstract:
[cze][eng]
Ať už v automobilovém a leteckém průmyslu, nebo snad i při výrobě kloubních implantátů, 3D kovový tisk nabízí spoustu využití. Povrch takto vytvořených komponent má nedostatečnou kvalitu, a tím přímo ovlivní únavovou životnost komponenty. Některé standardně používané metody na úpravu povrchu jsou pro komponenty vytvořené aditivní technologií se složitou geometrií nevhodné. Bakalářská práce nabízí přehled povrchových úprav, které jsou vhodné pro použití na aditivně vyrobené komponenty. Hlavním zaměřením jsou materiály Ti-6Al-4V a Inconel 718. Je popsán vliv jednotlivých metod na mechanické vlastnosti. Posledním částí je návrh vhodného zpracování pro modelové typy komponent. Užitek práce se dá najít v seznámení čtenáře s problematikou a jejím vývojem, kritickém posouzení jednotlivých možností úpravy povrchu a pomoci při důkladném výběru vhodné povrchové úpravy pro specifickou komponentu.
Power bed fusion is advantageously being used for manufacturing of not only critical automotive and aerospace components, but even for biomedical implants. As-built components suffer from poor surface quality. The quality of surface directly affects fatigue behaviour. Some of the commonly used surface finishing methods are not suitable for additively manufactured components with intricate geometries. This bachelor thesis is focused on description of suitable methods for such components. The centre of attention is on Ti-6Al-4V and Inconel 718. The impact of each one of the methods on mechanical properties is discussed. Lastly a procedure of surface finishing for model cases of theoretical components is proposed. The main takeaway from this paper is understanding the obstacle that poor quality of surface to additively manufactured parts is and different solutions, to this problem, that described methods offer. Subsequently a critical analysis of the usability of the methods and help with designing a surface treatment procedure is offered.
Keywords:
additive manufacturing; impact on mechanical properties; Selective Laser Melting; surface finish; aditivní technologie; Selective Laser Melting; vliv na mechanické vlastnosti; úprava povrchu
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: http://hdl.handle.net/11012/205889