Original title:
Mechanické vlastnosti polymerů vyrobených 3D tiskem
Translated title:
Mechanical properties of polymers produced by 3D printing technology
Authors:
Král, Filip ; Moravčík, Igor (referee) ; Válka, Libor (advisor) Document type: Master’s theses
Year:
2018
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta strojního inženýrství Abstract:
[cze][eng]
Práce se zabývá hodnocením závislosti materiálových charakteristik na anizotropii polymerů Nylon 12 a Ultem 9085 vyrobených 3D tiskovou technologií Fused Deposition Modeling. Hodnocení materiálových charakteristik bylo provedeno na základě zkoušek tahem a neinstrumentovaných rázových zkoušek. Bylo dokázáno, že materiálové charakteristiky jsou silně závislé na anizotropii, tj. na velikosti a směru nanášeného vrstvení obou typů polymerů.
The thesis deals with the dependence of mechanical characteristics on the anisotropy of polymers Nylon 12 and Ultem 9085 made by a 3D printing technology Fused Deposition Modeling (FDM). The evaluation of the material characteristics was performed on the basis of tensile and non-instrumental impact tests. It was proven that the material characteristics are strongly dependent on anisotropy, i.e. on layer thickness and raster angle for both types of polymers.
Keywords:
Charpy impact test; Fused Deposition Modeling; layer thickness; Nylon 12; polymer; raster angle; tensile test; Ultem 9085; Fused Deposition Modeling; Nylon 12; polymer; rázová houževnatost; směr vrstvení; Ultem 9085; velikost vrstvení; zkouška tahem
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: http://hdl.handle.net/11012/82305