Original title:
Studium tepelných vlastností materiálů pro 3D tisk
Translated title:
Study of Thermal Properties of Materials for 3D Printing
Authors:
Lapčíková, Tereza ; Menčík, Přemysl (referee) ; Zmeškal, Oldřich (advisor) Document type: Bachelor's theses
Year:
2021
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta chemická Abstract:
[cze][eng]
Cílem bakalářské práce bylo prostudovat tepelné vlastnosti materiálů používaných pro 3D tisk (tzv. filamentů) a to zejména kyselinu polymléčnou (PLA). V rámci teoretické části byla vypracována rešerše popisující některé metody 3D tisku a souhrn materiálů vhodných k tomuto účelu. Zejména jsme se zaměřili na přípravu PLA, její chemické, fyzikální a tepelné vlastnosti a její využití při 3D tisku, například v biomedicínských aplikacích. V experimentální části byly technikou 3D tisku připraveny vzorky PLA o různých tloušťkách a byly studovány tepelné vlastnosti především měrná tepelná kapacita a měrná tepelná vodivost. Bylo zjištěno, že měrná tepelná vodivost studovaných materiálů je 0,128 W/m/K a měrná tepelná kapacita 1335 J/kg/K. Tyto hodnoty odpovídají tabelovaným hodnotám uvedeným v literatuře, z čehož lze usoudit, že metodu popsanou v této práci lze použít ke studiu tepelných vlastností objemových materiálů.
The aim of this bachelor thesis was to study thermal properties of materials used for 3D printing (so-called filaments), especially a polylactic acid (PLA). Within the theoretical part there was performed the literature review focused on the description of different methods of 3D printing including the summary of suitable materials for these technologies. In particular, we focused on the preparation of PLA, its summarization of its chemical, physical and thermal properties and its practical use in 3D additive printing manufacturing, e.g. in biomedical applications. In the experimental part, PLA samples of different thicknesses were prepared by 3D printing technique and thermal properties such as thermal capacity and thermal conductivity were determined. It was found that thermal conductivity of studied material was 0,128 W/m/K and specific heat capacity 1335 J/kg/K. These values corresponded to the once given in the literature.
Keywords:
3D printing.; Polylactic acid (PLA); specific thermal capacity; specific thermal conductivity; thermal properties; 3D tisk.; Kyselina polymléčná (PLA); měrná tepelná kapacita; měrná tepelná vodivost; tepelné vlastnosti
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: http://hdl.handle.net/11012/201174