Název: Effect of aging on mechanical properties of 3D printed samples using stereolithography
Autoři: Drechslerová, V. ; Falta, J. ; Fíla, T. ; Dvořák, R. ; Kytýř, Daniel
Typ dokumentu: Příspěvky z konference
Konference/Akce: Youth Symposium on Experimental Solid Mechanics /18./, Telč (CZ), 20230611
Rok: 2023
Jazyk: eng
Abstrakt: This paper focuses on stereolithography (an additive manufacturing technology working on the principle of curing liquid resins layer by layer using ultraviolet radiation) and the effect of aging on the mechanical properties of the material and printed samples. The aging of the material could be a problem for its subsequent use as the stability of the mechanical properties would not be maintained and unwanted deterioration of the material could occur. As part of the research, sets of samples were printed and subjected to different aging methods and subsequently subjected to quasi-static and dynamic uni-axial load tests. From the data obtained, the basic mechanical properties of the material were calculated and compared with each other. The aim of this paper was to investigate whether aging process causes significant changes in the mechanical properties of the materials used, which could have a consequential impact on their use in different industries.
Klíčová slova: aging; mechanical properties; stereolithography
Zdrojový dokument: Acta Polytechnica CTU Proceedings
Poznámka: Související webová stránka: https://doi.org/10.14311/APP.2023.42.0001

Instituce: Ústav teoretické a aplikované mechaniky AV ČR (web)
Informace o dostupnosti dokumentu: Dokument je dostupný v příslušném ústavu Akademie věd ČR.
Původní záznam: https://hdl.handle.net/11104/0343916

Trvalý odkaz NUŠL: http://www.nusl.cz/ntk/nusl-536250


Záznam je zařazen do těchto sbírek:
Věda a výzkum > AV ČR > Ústav teoretické a aplikované mechaniky
Konferenční materiály > Příspěvky z konference