Original title:
Návrh výroby dvoukomponentního výlisku
Translated title:
Proposal for the production of a two-component molding
Authors:
Vašíček, Lukáš ; Ohnišťová, Petra (referee) ; Žák, Ladislav (advisor) Document type: Master’s theses
Year:
2023
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta strojního inženýrství Abstract:
[cze][eng]
Práce se zabývá návrhem technologie výroby dvoukomponentních dílů, které se umisťují do karoserie automobilu za účelem následné expanze, vlivem které dochází k utěsnění a odhlučnění. Pro výrobu se zvolila technologie vstřikování plastů. Součásti jsou vyráběny z materiálu PA66 a Terosonu EV 6059 o sériovosti 200 000 ks. Před samotným návrhem nástroje došlo ke kontrole technologičnosti součástí. Pro realizaci výroby se navrhla vstřikovací forma rámového konceptu o násobnosti 1+1. Jako vhodný stroj byl na základě výpočtů stanoven Engel VC 1640/400, který disponuje dvěma vstřikovacími jednotkami a uzavírací silou 4000kN. Na základě ekonomického vyhodnocení se dospělo k závěru, že za jednu sadu tří levých a tří pravých dílů je cena 22,9 Kč.
The thesis deals with the design of a technology for the production of two-component parts that are placed in the car body for the purpose of subsequent expansion, which results in sealing and soundproofing. The technology chosen for the production is plastic injection moulding. The components are made from PA66 and Teroson EV 6059 with a production run of 200 000 units. Before the actual design of the tool, the components were checked for manufacturability. An injection mould of frame concept with a multiplicity of 1+1 was designed for the production. Engel VC 1640/400, which has two injection units and a clamping force of 4000kN, was determined as a suitable machine based on calculations. On the basis of an economic evaluation, it was concluded that the price for one set of three left and three right parts is 22.9 CZK
Keywords:
expansion properties; injection mould; PA66; plastics; two-component injection moulding; dvoukomponentní vstřikování; expanzní vlastnosti; PA66; plasty; vstřikovací forma
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: http://hdl.handle.net/11012/212272