Original title:
Výroba pouzdra objemovým tvářením za studena
Translated title:
Housing production by cold forming
Authors:
Kouřil, Jakub ; Kunčická, Lenka (referee) ; Jopek, Miroslav (advisor) Document type: Bachelor's theses
Year:
2023
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta strojního inženýrství Abstract:
[cze][eng]
Bakalářská práce je zaměřena na výrobu součásti objemovým tvářením za studena. Předmětem práce je návrh technologie výroby pouzdra o sériovosti 6 000 000 ks/rok pomocí protlačování a pěchování. K výrobě je použita austenitická korozivzdorná ocel X5CrNi18-10. Na základě simulací byla zvolena nejvhodnější geometrická konfigurace tvářecích operací. Celý výrobní postup se skládá z první dělící, dvou tvářecích a poslední obráběcí a rádlovaní operace. Na základě vypočtené tvářecí síly o velikosti 175,6 kN a potřebného výkonu o velikosti 425 W, byl zvolen tvářecí automat CHUN ZU CBF-83S. Současně je navržen nástroj a v závěru je provedeno technicko-ekonomické zhodnocení, jehož součástí je také výpočet kusové ceny při uvažování 15% zisku, která činí 1,24 Kč.
The bachelor thesis is focused on the production of a part by cold forming. The subject of the thesis is the design of the technology of production of a housing with a production rate of 6 000 000 pcs/year by extrusion and tamping. The austenitic stainless steel X5CrNi18-10 is used for the production. Based on simulations, the most suitable geometric configuration of the forming operations was selected. The whole production process consists of a first cutting, two forming and a last machining and radnishing operation. Based on the calculated forming force of 175,6 kN and the required power of 425 W, the CHUN ZU CBF-83S automatic forming machine was selected. At the same time, the tool is designed and in the end a techno-economic evaluation is carried out, which also includes the calculation of the piece price considering a 15% profit, which amounts to 1,24 CZK.
Keywords:
extrusion; ramming; sleeve; Volume cold forming; Objemové tváření za studena; pouzdro; protlačování; pěchování
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: http://hdl.handle.net/11012/211787