Original title:
Testování obrobitelnosti 3D vytištěného materiálu
Translated title:
Evaluation of machinability of a 3D printed material
Authors:
Krestová, Alžběta ; Chladil, Josef (referee) ; Kolomý, Štěpán (advisor) Document type: Bachelor's theses
Year:
2023
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta strojního inženýrství Abstract:
[cze][eng]
Cílem bakalářské práce bylo zhodnocení obrobitelnosti 3D vytištěného materiálu metodou Bound Metal Deposition za různých podmínek během frézování. Byly měřeny síly během obrábění, dále byla zkoumána drsnost povrchu a vzniklé opotřebení na břitu nástroje. Hodnoty byly zaznamenávány a dále vyhodnocovány, kdy došlo k porovnávání výsledků a doporučení, za jakých podmínek vzniká opotřebení s nízkými hodnotami. Výsledkem bylo, že nižších hodnot opotřebení je dosahováno při obrábění bez použití chlazení a za nízké řezné rychlosti a posuvu.
The aim of the bachelor thesis was to evaluate the machinability of 3D printed material by Bound Metal Deposition method under different conditions during milling. The forces during machining were measured and the surface roughness and the resulting wear on the tool were also investigated. The values were recorded and further evaluated, where the results were compared and recommendations were made as to the conditions under which low values of wear are produced. The result was that lower wear values are achieved when machining without cooling and at low cutting speed and feed rate.
Keywords:
3D printing.; forces; Machinability; roughness; tool wear; 3D tisk.; drsnost; Obrobitelnost; opotřebení nástroje; síly
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: http://hdl.handle.net/11012/210409