Original title:
Optimalizace tvaru formy (sestavení stromečku) s ohledem na obalování robotem (ALUCAST)
Translated title:
Optimizing the ceramic tree mould taking into account the robotic shelling system
Authors:
Petřík, Michal ; Šmatelka, František (referee) ; Horáček, Milan (advisor) Document type: Master’s theses
Year:
2022
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta strojního inženýrství Abstract:
[cze][eng]
Tato diplomová práce se zabývá optimalizací tvarů stromečků pro obalování robotem. Pro optimalizaci bylo vybráno 6 druhů odlitků s ohledem na zvýšení využití tekutého kovu. Jednotlivé odlitky jsou popsány v kapitolách a v podkapitolách jsou popsány původní tvary stromečků určené pro ruční obalování, navržené tvary stromečků pro obalování robotem s následným zhodnocením na využití tekutého kovu. V dalších kapitolách jsou popsány benefity změny tvarů stromečků, vady odlitků způsobené touto změnou a doporučení, která by měla zamezit případný vznik těchto vad. Poslední kapitola se věnuje modifikované destičkové zkoušce, která bylo vytvořena přímo pro podmínky firmy Alucast s.r.o., kde byla praktická část řešena.
This diploma thesis deals with the optimization of the design pattern assembly for robot shell making system. Six types of castings were selected for optimization in regard to increase the utilization of liquid metal. The individual castings are described in the chapters and in the subchapters are described the original design pattern assembly intended for manual shell making, the designed pattern assembly shell making system with subsequent evaluation for the use of molten metal yield. The following chapters described the benefits of changing the pattern assembly design, the defects caused by this change and recommendations that should rule out the possible occurrence of these defects. The last chapter deals with a modified plate weight test, which was created directly for the conditions of the company Alucast s.r.o., where the practical part was solved.
Keywords:
"molten metal yield"; investment casting technology; robotic shelling; "využití tekutého kovu"; robotické obalování; technologie vytavitelného modelu
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: http://hdl.handle.net/11012/207610