Original title:
Modifikace povrchu materiálu vytvořeného technikou SLM
Translated title:
The use of surface modification for enhancing mechanical properties of SLM bulk materials
Authors:
Barinka, Michal ; Řehořek, Lukáš (referee) ; Jan, Vít (advisor) Document type: Master’s theses
Year:
2021
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta strojního inženýrství Abstract:
[cze][eng]
Tato diplomová práce se zabývá modifikací povrchu 3D tištěných kovových materiálů. V rešeršní části jsou uvedeny nejpoužívanější metody aditivní výroby a jejich procesní parametry ovlivňující kvalitu tištěných součástí. Dále jsou popsány vady vznikající během těchto procesů a techniky používané k jejich odstranění. V experimentální části práce byla provedena optimalizace parametrů elektrochemického leštění. Cílem bylo modifikovat drsný povrch součástí a zamezit tak vzniku defektů na povrchu. Mechanické vlastnosti byly zkoumány pomocí tříbodového ohybu při statickém a dynamickém zatěžování. Na lomových plochách byla provedena fraktografická analýza.
This diploma thesis deals with the surface modification of 3D printed metallic materials. The research part presents the most used methods of additive manufacturing and their process parameters influencing the quality of printed components. Defects arising during these processes and the techniques used to eliminate them are also described. In the experimental part of the work, the optimization of electrochemical polishing parameters was performed. The aim was to modify the rough surface of the components and thus prevent the formation of defects on the surface. The mechanical properties were investigated by means of three-point bending under static and dynamic loading. Fractographic analysis was performed on the quarry surfaces.
Keywords:
cold spray; Electrochemical polishing; selective laser melting; surface modification of 3D printed parts; cold spray; Elektrochemické leštění; modifikace povrchu 3D tištěných součástí; selective laser melting
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: http://hdl.handle.net/11012/201598