Original title:
Nová generace atomizátorů hydridotvorných prvků na bázi plazmového výboje s dielektrickou bariérou
Translated title:
Next generation of hydride atomizers based on dielectric barrier plasma discharge
Authors:
Kráľová, Zuzana ; Kratzer, Jan (advisor) ; Hrdlička, Aleš (referee) Document type: Bachelor's theses
Year:
2021
Language:
slo Abstract:
[eng][cze] Atomization conditions for selenium and lead hydrides in a dielectric barrier discharge (DBD) plasma atomizer with detection by atomic absorption spectrometry (AAS) were investigated in this work. Two designs of DBD atomizers were studied, the first one with glued electrodes and the second one with sputtered electrodes. The main experimental parameters were optimized, including supplied power and discharge gas (argon) flow rate. Additionally, the effect of several dryers was studied. Analytical figures of merit were determined for both plasma atomizers under the optimized conditions and compared to multiatomizer (MMQTA) as the most common hydride atomizer. The optimum flow rate for selenium determination was 75 cm3 min-1 Ar for both DBD atomizer designs as well as for MMQTA. In case of lead hydride atomization, ideal flow rate of argon was 175 cm3 min-1 for DBD atomizer with glued electrodes and 150 cm3 min-1 with DBD atomizer with sputtered electrodes, while MMQTA required only 100 cm3 min-1 Ar. The optimal power supply for DBD with sputtered electrodes was found significantly lower at 7.3 W for selenium and 13.3 W for lead. A dryer based on nafion membrane was found as the most effective for both analytes studied. Its efficacy was verified by optical emission spectrometry. As for analytical...V rámci tejto bakalárskej práce boli optimalizované podmienky pre atomizáciu hydridotvorných prvkov selénu a olova v plazmových atomizátoroch s dielektrickou bariérou (DBD), pričom použitou detekčnou metódou bola atómová absorpčná spektrometria (AAS). Skúmané boli dva konštrukčné typy planárnych DBD atomizátorov, a to s lepenými a s naprášenými elektródami. Optimalizované boli hlavné dva parametre DBD atomizátoru, a to výkon zdroja napätia a prietok argónu ako plazmového plynu. Tiež bol študovaný vplyv zaradenia sušidla do aparatúry. Za optimálnych podmienok boli pre oba prvky určené analytické charakteristiky oboch plazmových atomizátorov a porovnané s najbežnejšie používaným kremenným multiatomizátorom (MMQTA). Najlepším prietokom argónu pre atomizáciu hydridu selénu bolo 75 cm3 min-1 pre oba typy DBD atomizátorov. Tento prietok bol v prípade selénu ako analytu optimálny aj pre MMQTA. Pre olovo boli ideálne prietoky 175 cm3 min-1 pre atomizátor s lepenými elektródami a 150 cm3 min-1 pre atomizátor s naprášenými elektródami, zatiaľ čo pre MMQTA bol použitý prietok 100 cm3 min-1 . Optimálna hodnota výkonu zdroja napätia bola pre atomizátor s lepenými elektródami 21,2 W pre selén a 19 W pre olovo, zatiaľ čo pre naprášené elektródy to bolo 7,3 W pre selén a 13, 3 W pre olovo. Nafiónová trubica bola...
Keywords:
atomic absorption spectrometry; dielectric barrier discharge atomizer (DBD); hydride atomization; hydride generation; atomizace hydridů; atomová absorpční spektrometrie; generování hydridů; plazmový atomizátor s dielektrickou bariérou (DBD)
Institution: Charles University Faculties (theses)
(web)
Document availability information: Available in the Charles University Digital Repository. Original record: http://hdl.handle.net/20.500.11956/128291