Original title:
Konstrukce kamerového pojezdu pro natáčení časosběrných záběrů se zaměřením na objekt
Translated title:
Design of a camera slider for shooting time-lapse shots with a focus on the object
Authors:
Koupil, Michael ; Franke, Jakub (referee) ; Koutecký, Tomáš (advisor) Document type: Bachelor's theses
Year:
2021
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta strojního inženýrství Abstract:
[cze][eng]
Bakalářská práce se zabývá konstrukčním návrhem a realizací kamerového pojezdu za použití 3D tiskárny a platformy arduino. V teoretické části práce byla provedena analýza aktuálně užívaných typů kamerových pojezdů, na základě této analýzy byly vypracovány koncepční varianty, ze kterých bylo vybráno nejvhodnější konstrukční řešení. V praktické části práce bylo toto konstrukční řešení vypracováno, byly provedeny výpočty bezpečnosti u zvolených uzlů a byla vypracována výkresová dokumentace zařízení. Následně byl zhotoven prototyp, který byl testován, zda splňuje všechny požadavky. Zhotovené zařízení je schopno nést kameru o hmotnosti 3 kg, pojezdový vozík se pohybuje v rozsahu vzdáleností 0-1200 mm, rychlost hlavního pohybu je nastavitelná v rozmezí 0,37 mm/s až 60 mm/s. Dále je možné otáčet kamerou během hlavního pohybu v rozsahu od 0° do 1800° rychlostí, která je závislá na rychlosti hlavního lineárního pohybu. Zařízení tedy splňuje všechny cíle bakalářské práce.
This Bachelor’s thesis deals with the constructional plan and implementation of the camera slider while using a 3D printer and Arduino platform. In theoretical part, there is an analysis of the commonly used camera sliders. Based on this analysis, several variations were prepared, and the most feasible constructional plan was chosen. In practical part, the aforementioned plan was worked out, safety calculations concerning selected nodes were made, as well as the mechanical drawing of the device. A prototype was then built and tested, whether it met all the requirements. The suggested device fulfils all the objectives of the Bachelor’s thesis.
Keywords:
3D printing; Arduino; Linear guide; timelapse; 3D tisk; arduino; lineární vedení; časosběr
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: http://hdl.handle.net/11012/199109