Název:
Hodnocení těsnosti těsněné trubkovnice
Překlad názvu:
Tightness evaluation of gasketed tubesheet
Autoři:
Trubač, Daniel ; Pernica, Marek (oponent) ; Létal, Tomáš (vedoucí práce) Typ dokumentu: Diplomové práce
Rok:
2021
Jazyk:
cze
Nakladatel: Vysoké učení technické v Brně. Fakulta strojního inženýrství
Abstrakt: [cze][eng]
Tato diplomová práce se zaměřuje na problematiku těsnosti těsněných trubkovnic výměníku tepla s U trubkami, který splňuje pevnostní požadavky norem ČSN EN 13 445-3 a ČSN EN 1591-1. Zabývá se silami působícími na těsnění při zohlednění vlivů působících na celý výměník tepla. Samostatná část je věnována výpočtu průběhu tepla ve výměníku tepla a ověření pevnosti výměníku tepla. V závěrečné části je představen model výměníku tepla, na kterém je ukázán možný přístup k řešení těsnosti trubkovnice ve výměnících tepla. V práci proběhl výpočet teplotního pole modelu, jehož výsledky jsou použity v napěťově deformační analýze, jejímž hlavním cílem je zjištění kontaktních tlaků na těsnění. Z kontaktních tlaků na těsnění byly vyhodnoceny meze, ve kterých se nachází předpokládaná míra netěsnosti.
This master thesis focuses on the issue of tightness evaluation of gasketed tubesheet in U tube exchangers, which meets strength requirements of ČSN EN 13 445-3 and ČSN EN 1591-1 standards. It deals with the forces acting on the gasket when measuring the effects acting on the entire heat exchanger. A separate part is devoted to the calculation of the heat profile in the heat exchanger and verification of the strength of the heat exchanger. The final part introduces model of a heat exchanger, on which a possible approach to solving the tightness of the tubesheet in heat exchangers is presented. In thesis temperature field evaluation was conducted, the results of which were used in stress strain analysis, in order to obtain gasket contact pressure. Extreme gasket contact pressures were used to estimate leak rate limits.
Klíčová slova:
pevnost; přírubový spoj; trubkovnice; těsnost; těsnění; flange joint; gasket; sealing; tightness; tubesheet
Instituce: Vysoké učení technické v Brně
(web)
Informace o dostupnosti dokumentu:
Plný text je dostupný v Digitální knihovně VUT. Původní záznam: http://hdl.handle.net/11012/197409