Original title:
Možnosti recyklace PLA materiálu pro účely 3D tisku a vliv na mechanické vlastnosti
Translated title:
Possibilities of PLA material recycling for 3D printing purposes and influence on mechanical properties
Authors:
Sedláček, Vojtěch ; Krčma, Martin (referee) ; Koutecký, Tomáš (advisor) Document type: Bachelor's theses
Year:
2020
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta strojního inženýrství Abstract:
[cze][eng]
Tato bakalářská práce se zabývá porovnáním mechanických vlastností 3D výtisků PLA v průběhu recyklace. Recyklační cyklus probíhal následovně: vytištěná zkušební tělesa technologii FDM z PLA byla nadrcena a znovu extrudována na filament. Tento proces se třikrát opakoval. V každém cyklu byly otestovány zkušební tělesa. Proběhly tahové zkoušky za pokojové i zvýšené teploty. Zvýsledků je patrné že došlo k mírnému zvýšení pevnosti. Měření indexu toku taveniny prokázalo degradaci materiálu a jeho depolymerizaci.
This bachelor thesis deals with the comparison of mechanical properties of 3D PLA prints during recycling. The recycling cycle proceeded as follows: the printed FDM test specimens from the PLA were pulverised and re-extruded into a filament. This process was repeated three times. Test specimens were tested in each cycle. Tensile tests were performed at room and elevated temperatures. The results show that there was a slight increase in strength. Measurement of the melt flow index showed degradation of the material and its depolymerization.
Keywords:
3D print; index flow rate; PLA; recyclation; tensile test; 3D tisk; index toku taveniny; PLA; recyklace; tahová zkouška
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: http://hdl.handle.net/11012/192561