Original title:
Studium vlivu granulometrie jemných částic na fyzikálně-mechanické vlastnosti betonů
Translated title:
Influence of fine particles granulometry on the physico-mechanical properties of concrete
Authors:
Louda, Pavel ; Klečka,, Tomáš (referee) ; Ďurica,, Tibor (referee) ; Hubáček, Adam (referee) ; Hela, Rudolf (advisor) Document type: Doctoral theses
Year:
2019
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta stavební Abstract:
[cze][eng]
V teoretické části práce jsou popsány vlastnosti jemnozrnných příměsí a způsoby, jakými tyto příměsi modifikují cementový tmel a vlastnosti betonu. Dále jsou zde popsány způsoby, jak lze sestavovat křivky zrnitostí v rozmezí 0 - 1000 µm. V praktické části jsou popsány vlastnosti všech složek betonu, které byly pro zkoušky použity. Z příměsí a cementu byly sestavovány jednotlivé křivky zrnitostí. Sestavování křivek zrnitosti bylo prováděno v první fázi manuálně za pomocí programu MS Excel. Následně byl na základě poznatků ze skládání křivek zrnitostí vyvinut jednoduchý program, který dle zadaných limitů složí křivku zrnitosti automaticky. Maximální náhrada cementu byla stanovena na 25% hmotnosti. Fyzikálně - mechanické vlastnosti takto sestavených křivek zrnitosti byly nejprve ověřeny na maltových směsích, kde byly ověřovány zejména zpracovatelnost, objemové hmotnosti a pevnosti v čase 7, 28 a 90 dní. U vybraných receptur byla navíc ověřena pórovitost cementového tmele pomocí rtuťové porozimetrie. Získané poznatky byly následně v laboratoři aplikovány na beton. Zde byla maximální náhrada cementu stanovena na 30%. Ověřovány byly zejména konzistence betonu v čase, obsah vzduchu v betonu a pevnost betonu v tlaku po 3, 7, 28 a 90 dnech. Ověření bylo provedeno i v praxi při optimalizaci samozhutnitelného betonu. U optimalizované receptury byly zachovány mechanické vlastnosti, ale oproti původní receptuře došlo k finanční úspoře a ke snížení emisí CO2.
The theoretical part describes the properties of fine-grained admixtures and the ways how these admixtures modify concrete properties. There are also described ways to assemble grain curves in the range 0-1000 m. The practical part describes the properties of all the concrete components used for the tests. From the admixtures and cement, the individual grain curves were compiled. Curves were assembled in the first stage manually by using MS Excel. Subsequently, a simple program was developed based on the knowledge of composing grain curves, which automatically compiles the grain curve according to the given limits. The maximum cement replacement was set at 25% by weight. The physical and mechanical properties of the graded curves thus established were first verified on mortar mixtures where the workability, bulk density and strength were verified at the age 7, 28 and 90 days. In addition, the porosity of cement cement with mercury porosimetry has been verified for selected recipes. The acquired knowledge was subsequently applied to the concrete in the laboratory. Here the maximum cement compensation was set at 30%. In particular, concrete consistency over time, air content in the concrete and compresive strength of concrete at the age 3, 7, 28 and 90 days were verified. Verification was also carried out in practice on the optimization of self-compacting concrete. Mechanical properties have been retained for optimized recipe but there were financial savings and CO2 emissions reductions compare with the original recipe.
Keywords:
compressive strength; Concrete; consistency; density; fine-grained admixtures; Fuller grain curve; grain curves; porosity; self-compacting concrete; Beton; Fullerova křivka zrnitosti; jemnozrnné příměsi; konzistence; křivky zrnitosti; objemová hmotnost; pevnost v tlaku; pórovitost; samozhutnitelný beton
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: http://hdl.handle.net/11012/175973