Original title:
Mechanické vlastnosti materiálů připravovaných pomocí procesu SLM
Translated title:
Mechanical properties of materials prepared by SLM process
Authors:
Nopová, Klára ; Štěpánek, Roman (referee) ; Pantělejev, Libor (advisor) Document type: Master’s theses
Year:
2019
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta strojního inženýrství Abstract:
[cze][eng]
V rámci diplomové práce byly zjišťovány vlastnosti slitin vytvořených ze směsí prášků zpracovaných metodou SLM. Byly smíchány prášky slitin AlSi12 a EN AW 2618, a to v poměru 75 hm. % AlSi12 + 25 hm. % 2618, 50 hm. % AlSi12 + 50 hm. % 2618 a 25 hm. % AlSi12 + 75 hm. % 2618. Na vzorcích byla provedena metalografická analýza, analýza EBSD a liniová EDS mikroanalýza. Pro určení mechanických vlastností byla provedena tahová zkouška za pokojové teploty a zkouška tvrdosti. Vzorky po tahové zkoušce byly podrobeny fraktografické analýze.
The final thesis determined the properties of alloys formed from mixtures of powders processed by the SLM method. Powders of alloy AlSi12 and EN AW 2618 were fused in the proportion 75 wt. % AlSi12 + 25 wt. % 2618, 50 wt. % AlSi12 + 50 wt. % 2618 and 25 wt. % AlSi12 + 75 wt. % 2618. Metallographic analysis, EBSD analysis and line EDS microanalysis were made on the samples. Tensile test at room temperature and hardness were carried out to determine the mechanical properties. Fractographic analysis was performed after tensile test.
Keywords:
Al alloys; AlSi12; EN AW 2618; mechanical properties; Selective laser melting (SLM); Al slitiny; AlSi12; EN AW 2618; mechanické vlastnosti; Selektivní laserové tavení (SLM)
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: http://hdl.handle.net/11012/175538